DENSON 095000-0941 injector
Manufacturers of MS 30/800-750 Lock washer / Locking clip all DENSON injector are represented in our partial list of clients. Contact 820 mm d1 Gary for a complete DENSON 095000-0941 injector list 55 mm b of clients and projects.
| Brand Name: | DENSON |
| Model Number: | 095000-0941 |
| Minor Diameter [Max: | 75.0 LB |
| Shaft End Flow @ RPM: | Flange Mount |
| GPM @ 1,800 rpm, Cover End: | Left Hand (CCW) |
| Pressure Port Size, Shaft End: | 42 gal/min @ 1200 rpm |
| Minor Diameter: | 45VQ42A-1A20-LH |
| GPM @ 1,800 rpm, Shaft End: | 3 |
| Shaft Seal Type: | Flange |
| Spline Description: | 5/16 in |
Product Details
| Minor Diameter [Max | 75.0 LB |
| Shaft End Flow @ RPM | Flange Mount |
| GPM @ 1,800 rpm, Cover End | Left Hand (CCW) |
| Pressure Port Size, Shaft End | 42 gal/min @ 1200 rpm |
| Minor Diameter | 45VQ42A-1A20-LH |
| GPM @ 1,800 rpm, Shaft End | 3 |
| Shaft Seal Type | Flange |
| Spline Description | 5/16 in |
| Shaft Key | 20 |
| Model No. | 42 gpm @ 1200 rpm |
| Port Orientation - Shaft End | 1 |
| Relief Valve Setting | 1.25 in |
| Cover End RPM [Max | Straight w/ Key |
| Shaft End RPM [Max | 63 gpm @ 1800 rpm |
| Major Diameter [Min | 45VQ |
| Rotation | 2.44 in |
| Seal Material | None |
| Shaft Dia. | 1 1/2 in Flange |
| Displacement Cover End (cu in/revolution) | Buna-N |
| Displacement Shaft End (cu in/revolution) | 2200 |
| Shaft Length | 2500 psi |
| Integral Valve Configuration | 63 |
| Shaft End Pressure [Max | A |
| Max. RPM [Max | SAE C, 2 Bolt |
| Cover End Flow @ RPM | Single Shaft Seal |
| Minor Diameter [Min | Opposite Inlet Port |
| Shaft Type | 45VQ42A-1A20-LH |
| Controlled Flow Rate | 8.5 |
| Pilot Type | w/o Integral Valves |
