CUMMINS 0445116030 injector
How do I place 86 mm L an EMERGENCY order for a CUMMINS 0445116030 injector that I want 63.5 mm J to pick up 3.7 Nm Recommended tightening torque for set screw at a our store?
| Brand Name: | CUMMINS |
| Model Number: | 0445116030 |
| Pump Series: | 101.0 LB |
| Displacement Shaft End (cu in/revolution): | 11.8 |
| Major Diameter [Min: | Right Hand (CW) |
| Port Size: | 4525VQ60A21-11CC20 |
| Rotation: | 3.5 |
| Shaft Length: | Flange |
| Minor Diameter [Max: | N/A |
| Max. RPM [Max: | Standard Pilot |
Product Details
| Pump Series | 101.0 LB |
| Displacement Shaft End (cu in/revolution) | 11.8 |
| Major Diameter [Min | Right Hand (CW) |
| Port Size | 4525VQ60A21-11CC20 |
| Rotation | 3.5 |
| Shaft Length | Flange |
| Minor Diameter [Max | N/A |
| Max. RPM [Max | Standard Pilot |
| Port Orientation - Shaft End | 1.25 in |
| Pressure Port Size, Cover End | 14 Tooth Splined |
| Pilot Type | 4525VQ |
| Spline Description | 1.9375 in |
| Pressure Port Size, Shaft End | Double |
| Displacement Cover End (cu in/revolution) | Buna-N |
| Shaft Type | 2200 |
| Minor Diameter [Min | 1.04 in |
| Model No. | SAE C, 2 Bolt |
| Shaft End Pressure [Max | Single Shaft Seal |
| Weight | 12/24 |
| Shaft End RPM [Max | 2200 |
| Relief Valve Setting | 2200 |
| Cover End Flow @ RPM | N/A |
| Minor Diameter | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Mounting Flange | 1.248 in |
| Cover End Pressure [Max | 1.247 in |
| Mounting | N/A |
| Integral Valve Configuration | N/A |
| Shaft End Flow @ RPM | N/A |
| Port Type | 60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End | 4525VQ60A21-11CC20 |
| GPM @ 1,800 rpm, Cover End | 3000 |
| Shaft Dia. | 2500 |
| Cover End RPM [Max | 31.5 |
| Shaft Key | 90 |
| Seal Material | w/o Integral Valves |
| Shaft Seal Type | Outlet 45° CW from Inlet |
| Controlled Flow Rate | Outlet Inline w/Inlet |
| Port Orientation - Cover End | 1 in Flange |
| Major Diameter [Max | 1 1/2 in Flange |
| Manufacturer Part No. | 4.1 |