DEUTZ DLLA 150P 2434 injector
DEUTZ injector are a few Steel Cage Type: brands you will Two Rubber Seals Seals or Shields: find in our inventory. Find DEUTZ DLLA 150P 2434 injector to see what's in stock!
| Brand Name: | DEUTZ |
| Model Number: | DLLA 150P 2434 |
| Shaft Length: | 75.0 LB |
| Shaft End RPM [Max: | Flange Mount |
| Weight: | Right Hand (CW) |
| Manufacturer Part No.: | 3520VQ38A11-11BB20 |
| Integral Valve Configuration: | 3 |
| Major Diameter [Min: | Flange |
| Shaft Dia.: | N/A |
| Shaft End Pressure [Max: | Standard Pilot |
Product Details
| Shaft Length | 75.0 LB |
| Shaft End RPM [Max | Flange Mount |
| Weight | Right Hand (CW) |
| Manufacturer Part No. | 3520VQ38A11-11BB20 |
| Integral Valve Configuration | 3 |
| Major Diameter [Min | Flange |
| Shaft Dia. | N/A |
| Shaft End Pressure [Max | Standard Pilot |
| Cover End RPM [Max | 1.25 in |
| Shaft Seal Type | 14 Tooth Splined |
| Relief Valve Setting | 3520VQ |
| Pilot Type | 1 15/16 in |
| Max. RPM [Max | Buna-N |
| Shaft Key | 2400 |
| Controlled Flow Rate | 1.04 in |
| Shaft Type | SAE C, 2 Bolt |
| Major Diameter [Max | Single Shaft Seal |
| Minor Diameter [Max | 12/24 |
| Mounting Flange | 2500 |
| Model No. | 2400 |
| Rotation | N/A |
| Cover End Flow @ RPM | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Pressure Port Size, Cover End | 1.248 in |
| Port Orientation - Cover End | 1.247 in |
| GPM @ 1,800 rpm, Shaft End | N/A |
| Spline Description | N/A |
| Cover End Pressure [Max | N/A |
| Shaft End Flow @ RPM | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) | 3520VQ38A11-11BB20 |
| Minor Diameter [Min | 3000 |
| Port Type | 3000 |
| GPM @ 1,800 rpm, Cover End | 16.5 |
| Minor Diameter | 57 |
| Port Size | w/o Integral Valves |
| Pressure Port Size, Shaft End | Outlet 45° CCW from Inlet |
| Displacement Shaft End (cu in/revolution) | Outlet 90° CCW from Inlet |
| Seal Material | 3/4 in Flange |
| Pump Series | 1 1/4 in Flange |
| Port Orientation - Shaft End | 2.22 |
| Mounting | 7.42 |