DENSON 0950000941 injector
Browse DENSON 0950000941 injector Categories in the 3.3 Calculation factor Y2 Manufacturers Online 4 mm K Free. including DENSON injector. 50 mm d
| Brand Name: | DENSON |
| Model Number: | 0950000941 |
| Major Diameter [Min: | 45.0 LB |
| Displacement Shaft End (cu in/revolution): | 4.1 |
| Port Orientation - Shaft End: | Left Hand (CCW) |
| Rotation: | 2520VQ21E11-11CC20-LH |
| Manufacturer Part No.: | 2.5 |
| Cover End Pressure [Max: | Flange |
| Minor Diameter: | N/A |
| Shaft Dia.: | Standard Pilot |
Product Details
| Major Diameter [Min | 45.0 LB |
| Displacement Shaft End (cu in/revolution) | 4.1 |
| Port Orientation - Shaft End | Left Hand (CCW) |
| Rotation | 2520VQ21E11-11CC20-LH |
| Manufacturer Part No. | 2.5 |
| Cover End Pressure [Max | Flange |
| Minor Diameter | N/A |
| Shaft Dia. | Standard Pilot |
| Integral Valve Configuration | 0.875 in |
| Shaft End RPM [Max | 13 Tooth Splined |
| Pump Series | 2520VQ |
| Max. RPM [Max | 1.375 in |
| GPM @ 1,800 rpm, Shaft End | Double |
| Controlled Flow Rate | Buna-N |
| Minor Diameter [Max | 2500 |
| Shaft Key | 0.715 in |
| Cover End Flow @ RPM | SAE B, 2 Bolt |
| Shaft End Pressure [Max | Single Shaft Seal |
| Pilot Type | 16/32 |
| Relief Valve Setting | 2700 |
| Cover End RPM [Max | 2500 |
| Mounting Flange | N/A |
| Pressure Port Size, Cover End | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Shaft Seal Type | 0.873 in |
| Minor Diameter [Min | 0.872 in |
| Major Diameter [Max | N/A |
| Pressure Port Size, Shaft End | N/A |
| GPM @ 1,800 rpm, Cover End | N/A |
| Mounting | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Shaft Type | 2520VQ21E11-11CC20-LH |
| Port Size | 3000 |
| Port Orientation - Cover End | 3000 |
| Shaft Length | 16.5 |
| Displacement Cover End (cu in/revolution) | 31.5 |
| Port Type | w/o Integral Valves |
| Weight | Outlet 45° CW from Inlet |
| Spline Description | Outlet Inline w/Inlet |
| Shaft End Flow @ RPM | 1 1/16 in SAE O-Ring |
| Model No. | 1 in Flange |
| Seal Material | 2.2 |