DEUTZ DLLA 148P 1761 injector
Various Plastic Cage Type: DEUTZ injector types and sizes to accommodate your Two Rubber Seals Seals or Shields: DEUTZ DLLA 148P 1761 injector requirements. 18mm B
| Brand Name: | DEUTZ |
| Model Number: | DLLA 148P 1761 |
| Cover End Pressure [Max: | 76.0 LB |
| Model No.: | Flange Mount |
| Displacement Cover End (cu in/revolution): | Left Hand (CCW) |
| Pressure Port Size, Cover End: | 3525VQ38A21-1CB20L |
| Port Type: | 3 |
| Shaft Type: | Flange |
| Shaft Dia.: | 5/16 in |
| Controlled Flow Rate: | Standard Pilot |
Product Details
| Cover End Pressure [Max | 76.0 LB |
| Model No. | Flange Mount |
| Displacement Cover End (cu in/revolution) | Left Hand (CCW) |
| Pressure Port Size, Cover End | 3525VQ38A21-1CB20L |
| Port Type | 3 |
| Shaft Type | Flange |
| Shaft Dia. | 5/16 in |
| Controlled Flow Rate | Standard Pilot |
| Pilot Type | 1.25 in |
| Weight | Straight w/ Key |
| Mounting Flange | 3525VQ |
| Integral Valve Configuration | 2 1/2 in |
| Cover End Flow @ RPM | Buna-N |
| GPM @ 1,800 rpm, Shaft End | 2400 |
| Major Diameter [Min | N/A |
| Seal Material | SAE C, 2 Bolt |
| Shaft Key | Single Shaft Seal |
| Rotation | N/A |
| Major Diameter [Max | 2500 |
| Shaft Length | 2400 |
| Minor Diameter [Min | N/A |
| Max. RPM [Max | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Spline Description | N/A |
| Minor Diameter | N/A |
| Port Orientation - Shaft End | N/A |
| Mounting | N/A |
| Shaft End RPM [Max | N/A |
| Port Orientation - Cover End | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Shaft End Pressure [Max | 3525VQ38A21-1CB20L |
| Manufacturer Part No. | 3000 |
| Cover End RPM [Max | 3000 |
| GPM @ 1,800 rpm, Cover End | 31.5 |
| Shaft Seal Type | 57 |
| Pump Series | w/o Integral Valves |
| Minor Diameter [Max | Outlet 45° CCW from Inlet |
| Relief Valve Setting | Outlet Inline w/Inlet |
| Port Size | 1 in Flange |
| Pressure Port Size, Shaft End | 1 1/4 in Flange |
| Displacement Shaft End (cu in/revolution) | 4.12 |
| Shaft End Flow @ RPM | 7.42 |