Diesel Engine D342 Supercharger 6N7203 Turbocharger for Caterpillar Parts Turbo
| Displacement Cover End (cu in/revolution): |
45.0 LB |
| Port Type: |
Flange Mount |
| Cover End RPM [Max: |
Left Hand (CCW) |
| Controlled Flow Rate: |
2520VQ21A8-11BC20L |
| Pressure Port Size, Cover End: |
2.5 |
| Minor Diameter: |
Flange |
| Shaft End RPM [Max: |
N/A |
| Rotation: |
Standard Pilot |
| PDF |
|
Product Details
| Displacement Cover End (cu in/revolution) |
45.0 LB |
| Port Type |
Flange Mount |
| Cover End RPM [Max |
Left Hand (CCW) |
| Controlled Flow Rate |
2520VQ21A8-11BC20L |
| Pressure Port Size, Cover End |
2.5 |
| Minor Diameter |
Flange |
| Shaft End RPM [Max |
N/A |
| Rotation |
Standard Pilot |
| Shaft Length |
0.875 in |
| Shaft Key |
13 Tooth Splined |
| Cover End Flow @ RPM |
2520VQ |
| Pressure Port Size, Shaft End |
1 3/8 in |
| Minor Diameter [Max |
Double |
| Weight |
Buna-N |
| Shaft Seal Type |
2500 |
| Shaft Type |
0.715 in |
| Max. RPM [Max |
SAE B, 2 Bolt |
| Port Size |
Single Shaft Seal |
| Relief Valve Setting |
16/32 |
| Model No. |
2700 |
| Mounting |
2500 |
| Pilot Type |
N/A |
| Pump Series |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Shaft End Pressure [Max |
0.873 in |
| Shaft Dia. |
0.872 in |
| Major Diameter [Min |
N/A |
| Mounting Flange |
N/A |
| Port Orientation - Cover End |
N/A |
| Port Orientation - Shaft End |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Minor Diameter [Min |
2520VQ21A8-11BC20L |
| GPM @ 1,800 rpm, Cover End |
3000 |
| GPM @ 1,800 rpm, Shaft End |
3000 |
| Major Diameter [Max |
12 |
| Shaft End Flow @ RPM |
31.5 |
| Manufacturer Part No. |
w/o Integral Valves |
| Seal Material |
Outlet 45° CW from Inlet |
| Cover End Pressure [Max |
Outlet 90° CCW from Inlet |
| Integral Valve Configuration |
3/4 in Flange |
| Spline Description |
1 in Flange |
| Displacement Shaft End (cu in/revolution) |
4.1 |