Hydraulic Pump Shaft Seal Kit for Eaton 5423 Drive Shaft Oil Seal
| Mounting Flange: |
30.0 LB |
| Displacement Cover End (cu in/revolution): |
Flange Mount |
| Pump Series: |
Right Hand (CW) |
| Relief Valve Setting: |
V2010-1F12S3S-11DD12 |
| Spline Description: |
1 1/2 |
| Minor Diameter [Max: |
Flange |
| Controlled Flow Rate: |
N/A |
| Mounting: |
N/A |
| PDF |
|
Product Details
| Mounting Flange |
30.0 LB |
| Displacement Cover End (cu in/revolution) |
Flange Mount |
| Pump Series |
Right Hand (CW) |
| Relief Valve Setting |
V2010-1F12S3S-11DD12 |
| Spline Description |
1 1/2 |
| Minor Diameter [Max |
Flange |
| Controlled Flow Rate |
N/A |
| Mounting |
N/A |
| Displacement Shaft End (cu in/revolution) |
0.875 in |
| Model No. |
13 Tooth Splined |
| Shaft Dia. |
V2010 |
| Port Orientation - Cover End |
1 5/16 in |
| Seal Material |
Buna-N |
| Weight |
2400 |
| Pilot Type |
0.728 in |
| Minor Diameter |
SAE B, 2 Bolt |
| Port Size |
Single Shaft Seal |
| Manufacturer Part No. |
16/32 |
| Shaft Type |
3000 |
| GPM @ 1,800 rpm, Cover End |
2400 |
| Cover End Pressure [Max |
N/A |
| Port Type |
3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm |
| Shaft End RPM [Max |
0.873 in |
| Minor Diameter [Min |
0.872 in |
| Major Diameter [Max |
0.7335 in |
| Integral Valve Configuration |
0.7225 in |
| Shaft Seal Type |
N/A |
| Max. RPM [Max |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Pressure Port Size, Shaft End |
V2010-1F12S3S-11DD12 |
| Pressure Port Size, Cover End |
2500 |
| Major Diameter [Min |
2200 |
| Cover End Flow @ RPM |
4.5 |
| GPM @ 1,800 rpm, Shaft End |
18 |
| Shaft Length |
N/A |
| Shaft End Flow @ RPM |
Outlet 135° CW from Inlet |
| Shaft Key |
Outlet 90° CW from Inlet |
| Rotation |
1/2 in SAE O-Ring |
| Cover End RPM [Max |
3/4 in SAE O-Ring |
| Shaft End Pressure [Max |
0.6 |
| Port Orientation - Shaft End |
2.38 |