ALP2A/ALP2-D-6/9/10/13/16/20/22/25/30/34/40/50 High Pressure Hydraulic Gear Pump
Max. RPM [Max: |
30.0 LB |
Manufacturer Part No.: |
Flange Mount |
Cover End Flow @ RPM: |
Right Hand (CW) |
Minor Diameter [Max: |
V2010-1F9S5S-11AA12 |
GPM @ 1,800 rpm, Cover End: |
1 1/2 |
Shaft End Flow @ RPM: |
Flange |
Model No.: |
N/A |
Shaft End Pressure [Max: |
N/A |
PDF |
|
Product Details
Max. RPM [Max |
30.0 LB |
Manufacturer Part No. |
Flange Mount |
Cover End Flow @ RPM |
Right Hand (CW) |
Minor Diameter [Max |
V2010-1F9S5S-11AA12 |
GPM @ 1,800 rpm, Cover End |
1 1/2 |
Shaft End Flow @ RPM |
Flange |
Model No. |
N/A |
Shaft End Pressure [Max |
N/A |
Major Diameter [Max |
0.875 in |
Shaft Seal Type |
13 Tooth Splined |
Cover End Pressure [Max |
V2010 |
Major Diameter [Min |
1 5/16 in |
Mounting Flange |
Buna-N |
Controlled Flow Rate |
2800 |
Minor Diameter |
0.728 in |
Port Orientation - Cover End |
SAE B, 2 Bolt |
Port Orientation - Shaft End |
Single Shaft Seal |
Displacement Shaft End (cu in/revolution) |
16/32 |
Shaft Type |
3000 |
Port Size |
2800 |
Shaft Length |
N/A |
Pump Series |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Pressure Port Size, Cover End |
0.873 in |
Seal Material |
0.872 in |
Minor Diameter [Min |
0.7335 in |
Spline Description |
0.7225 in |
Shaft End RPM [Max |
N/A |
Integral Valve Configuration |
9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm |
Shaft Dia. |
V2010-1F9S5S-11AA12 |
Shaft Key |
2500 |
Weight |
2500 |
Rotation |
7.5 |
Mounting |
13.5 |
Pressure Port Size, Shaft End |
N/A |
Displacement Cover End (cu in/revolution) |
Outlet 135° CCW from Inlet |
Pilot Type |
Outlet Opposite Inlet |
Cover End RPM [Max |
1/2 in SAE O-Ring |
GPM @ 1,800 rpm, Shaft End |
3/4 in SAE O-Ring |
Port Type |
1 |
Relief Valve Setting |
1.81 |