Bulldozer D50 Spare Parts Hydraulic Gear Oil Pump 07400-40400
| Integral Valve Configuration: |
75.0 LB |
| Spline Description: |
Flange Mount |
| Pressure Port Size, Cover End: |
Right Hand (CW) |
| Minor Diameter [Min: |
3520VQ30E11-11DD20 |
| Shaft End Pressure [Max: |
3 |
| Shaft End Flow @ RPM: |
Flange |
| Shaft Seal Type: |
N/A |
| Shaft Dia.: |
Standard Pilot |
| PDF |
|
Product Details
| Integral Valve Configuration |
75.0 LB |
| Spline Description |
Flange Mount |
| Pressure Port Size, Cover End |
Right Hand (CW) |
| Minor Diameter [Min |
3520VQ30E11-11DD20 |
| Shaft End Pressure [Max |
3 |
| Shaft End Flow @ RPM |
Flange |
| Shaft Seal Type |
N/A |
| Shaft Dia. |
Standard Pilot |
| Cover End Flow @ RPM |
1.25 in |
| Mounting |
14 Tooth Splined |
| Port Orientation - Shaft End |
3520VQ |
| Controlled Flow Rate |
1 15/16 in |
| Manufacturer Part No. |
Double |
| Displacement Cover End (cu in/revolution) |
Buna-N |
| Port Size |
2500 |
| Major Diameter [Max |
1.04 in |
| Shaft End RPM [Max |
SAE C, 2 Bolt |
| Relief Valve Setting |
Single Shaft Seal |
| Seal Material |
12/24 |
| Weight |
2500 |
| Displacement Shaft End (cu in/revolution) |
6 |
| Max. RPM [Max |
N/A |
| Shaft Key |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Port Type |
1.248 in |
| Port Orientation - Cover End |
1.247 in |
| Shaft Type |
N/A |
| Major Diameter [Min |
N/A |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Pilot Type |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End |
3520VQ30E11-11DD20 |
| Cover End Pressure [Max |
3000 |
| Pump Series |
3000 |
| Cover End RPM [Max |
16.5 |
| Shaft Length |
45 |
| Rotation |
w/o Integral Valves |
| Pressure Port Size, Shaft End |
Outlet 135° CW from Inlet |
| Mounting Flange |
Outlet 90° CW from Inlet |
| Minor Diameter |
1 1/16 in SAE O-Ring |
| Minor Diameter [Max |
1 1/4 in Flange |
| Model No. |
2.2 |