Diesel Engine 3408 Parts Turbo 8N6553 Turbocharger for Caterpillar Truck
| Shaft End Pressure [Max: |
35.0 LB |
| Manufacturer Part No.: |
Flange Mount |
| Port Type: |
Right Hand (CW) |
| Shaft Key: |
V2020-1F13S9S-11AA30 |
| Seal Material: |
2 |
| Mounting Flange: |
Flange |
| Shaft End Flow @ RPM: |
N/A |
| Relief Valve Setting: |
N/A |
| PDF |
|
Product Details
| Shaft End Pressure [Max |
35.0 LB |
| Manufacturer Part No. |
Flange Mount |
| Port Type |
Right Hand (CW) |
| Shaft Key |
V2020-1F13S9S-11AA30 |
| Seal Material |
2 |
| Mounting Flange |
Flange |
| Shaft End Flow @ RPM |
N/A |
| Relief Valve Setting |
N/A |
| Integral Valve Configuration |
0.875 in |
| Pilot Type |
13 Tooth Splined |
| Port Orientation - Cover End |
V2020 |
| Cover End Pressure [Max |
1.3125 in |
| Max. RPM [Max |
Double |
| Pressure Port Size, Cover End |
Buna-N |
| Controlled Flow Rate |
2400 |
| Spline Description |
0.728 in |
| Mounting |
SAE B, 2 Bolt |
| Minor Diameter [Max |
Single Shaft Seal |
| Shaft End RPM [Max |
16/32 |
| Cover End RPM [Max |
2800 |
| Shaft Length |
2400 |
| Minor Diameter |
N/A |
| Port Orientation - Shaft End |
9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End |
0.873 in |
| Rotation |
0.872 in |
| Pressure Port Size, Shaft End |
0.734 in |
| Model No. |
0.723 in |
| Shaft Seal Type |
N/A |
| Port Size |
13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm |
| Weight |
V2020-1F13S9S-11AA30 |
| Shaft Dia. |
2500 |
| GPM @ 1,800 rpm, Cover End |
2200 |
| Displacement Shaft End (cu in/revolution) |
2.6 |
| Major Diameter [Min |
19.5 |
| Major Diameter [Max |
N/A |
| Shaft Type |
Outlet Opposite Inlet |
| Displacement Cover End (cu in/revolution) |
Outlet Opposite Inlet |
| Cover End Flow @ RPM |
3/4 in SAE O-Ring |
| Pump Series |
3/4 in SAE O-Ring |
| Minor Diameter [Min |
1.8 |