Charging Pump PC200-6 PC300-6 Excavator Pilot Pump
| Minor Diameter [Max: |
18.0 LB |
| Manufacturer Part No.: |
Flange Mount |
| Displacement Cover End (cu in/revolution): |
Right Hand (CW) |
| Cover End Flow @ RPM: |
6 gal/min @ 1200 rpm |
| Displacement Shaft End (cu in/revolution): |
1.25 |
| Shaft Type: |
NPT |
| Port Type: |
N/A |
| Pressure Port Size, Shaft End: |
22 |
| PDF |
|
Product Details
| Minor Diameter [Max |
18.0 LB |
| Manufacturer Part No. |
Flange Mount |
| Displacement Cover End (cu in/revolution) |
Right Hand (CW) |
| Cover End Flow @ RPM |
6 gal/min @ 1200 rpm |
| Displacement Shaft End (cu in/revolution) |
1.25 |
| Shaft Type |
NPT |
| Port Type |
N/A |
| Pressure Port Size, Shaft End |
22 |
| Port Orientation - Cover End |
6 gpm @ 1200 rpm |
| Shaft End RPM [Max |
0.73 in |
| GPM @ 1,800 rpm, Shaft End |
11 Tooth Splined |
| Shaft Seal Type |
9 / 1750 |
| Seal Material |
V20 |
| Port Size |
1.25 in |
| Shaft End Pressure [Max |
Single |
| Cover End Pressure [Max |
3/4 in NPT |
| Max. RPM [Max |
Buna-N |
| Weight |
3400 |
| Integral Valve Configuration |
2500 psi |
| Mounting Flange |
9 |
| Relief Valve Setting |
P |
| Pump Series |
SAE A, 2 Bolt |
| Spline Description |
P |
| Shaft End Flow @ RPM |
1 |
| Minor Diameter [Min |
90° CCW from Inlet |
| Port Orientation - Shaft End |
1.2 |
| Major Diameter [Max |
5 gal/min |
| Pressure Port Size, Cover End |
Flow Control & Relief |
| Shaft Dia. |
1750 psi |
| Pilot Type |
38B |