Vane Pump Hidrolik Vickers V10 For Hydraulic Parts
| Minor Diameter [Max: |
35.0 LB |
| Shaft End Pressure [Max: |
Flange Mount |
| Pressure Port Size, Cover End: |
Right Hand (CW) |
| Shaft Dia.: |
V2020-1F9S7S-11DD30 |
| Relief Valve Setting: |
2 |
| Rotation: |
Flange |
| Cover End Flow @ RPM: |
N/A |
| Major Diameter [Min: |
N/A |
| PDF |
|
Product Details
| Minor Diameter [Max |
35.0 LB |
| Shaft End Pressure [Max |
Flange Mount |
| Pressure Port Size, Cover End |
Right Hand (CW) |
| Shaft Dia. |
V2020-1F9S7S-11DD30 |
| Relief Valve Setting |
2 |
| Rotation |
Flange |
| Cover End Flow @ RPM |
N/A |
| Major Diameter [Min |
N/A |
| Integral Valve Configuration |
0.875 in |
| Mounting Flange |
13 Tooth Splined |
| Pump Series |
V2020 |
| Model No. |
1 5/16 in |
| Major Diameter [Max |
Buna-N |
| Shaft Type |
2800 |
| Minor Diameter |
0.728 in |
| Spline Description |
SAE B, 2 Bolt |
| Pilot Type |
Single Shaft Seal |
| Cover End Pressure [Max |
16/32 |
| GPM @ 1,800 rpm, Shaft End |
2500 |
| Port Orientation - Shaft End |
2800 |
| Mounting |
N/A |
| Shaft End Flow @ RPM |
7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Pressure Port Size, Shaft End |
0.873 in |
| Displacement Shaft End (cu in/revolution) |
0.872 in |
| Shaft Key |
0.7335 in |
| Cover End RPM [Max |
0.7225 in |
| Port Size |
N/A |
| Minor Diameter [Min |
9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm |
| Shaft Length |
V2020-1F9S7S-11DD30 |
| Displacement Cover End (cu in/revolution) |
2500 |
| Manufacturer Part No. |
2500 |
| Seal Material |
10.5 |
| Port Type |
13.5 |
| Max. RPM [Max |
N/A |
| Shaft Seal Type |
Outlet 90° CW from Inlet |
| GPM @ 1,800 rpm, Cover End |
Outlet 90° CW from Inlet |
| Port Orientation - Cover End |
3/4 in SAE O-Ring |
| Weight |
3/4 in SAE O-Ring |
| Controlled Flow Rate |
1.39 |
| Shaft End RPM [Max |
1.81 |