replacement china hydraulic motor 25M for vickers
| Major Diameter [Max: |
45.0 LB |
| GPM @ 1,800 rpm, Shaft End: |
Flange Mount |
| Relief Valve Setting: |
Right Hand (CW) |
| Minor Diameter [Min: |
2520VQ14A12-11CC20 |
| Minor Diameter: |
2 1/2 |
| Cover End Pressure [Max: |
Flange |
| Pilot Type: |
N/A |
| Controlled Flow Rate: |
Standard Pilot |
| PDF |
|
Product Details
| Major Diameter [Max |
45.0 LB |
| GPM @ 1,800 rpm, Shaft End |
Flange Mount |
| Relief Valve Setting |
Right Hand (CW) |
| Minor Diameter [Min |
2520VQ14A12-11CC20 |
| Minor Diameter |
2 1/2 |
| Cover End Pressure [Max |
Flange |
| Pilot Type |
N/A |
| Controlled Flow Rate |
Standard Pilot |
| Seal Material |
0.875 in |
| Max. RPM [Max |
13 Tooth Splined |
| Port Type |
2520VQ |
| Integral Valve Configuration |
1.375 in |
| Cover End RPM [Max |
Buna-N |
| Pressure Port Size, Cover End |
2700 |
| Model No. |
0.715 in |
| Shaft End Pressure [Max |
SAE B, 2 Bolt |
| Spline Description |
Single Shaft Seal |
| Port Orientation - Cover End |
16/32 |
| Shaft End Flow @ RPM |
2700 |
| Minor Diameter [Max |
2700 |
| Manufacturer Part No. |
N/A |
| Major Diameter [Min |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Port Size |
0.873 in |
| Pressure Port Size, Shaft End |
0.872 in |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Port Orientation - Shaft End |
N/A |
| Shaft Length |
N/A |
| Displacement Shaft End (cu in/revolution) |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) |
2520VQ14A12-11CC20 |
| Mounting |
2300 |
| Pump Series |
3000 |
| Rotation |
18 |
| Mounting Flange |
21 |
| Shaft End RPM [Max |
w/o Integral Valves |
| Shaft Type |
Outlet 45° CW from Inlet |
| Shaft Dia. |
Outlet Inline w/Inlet |
| Shaft Key |
3/4 in Flange |
| Cover End Flow @ RPM |
1 in Flange |
| Shaft Seal Type |
2.41 |
| Weight |
2.77 |