New Aftermarket PC225-7 Diesel Fuel Injection Feed Pump Assembly
| Shaft Type: |
18.0 LB |
| Displacement Shaft End (cu in/revolution): |
Flange Mount |
| Shaft End Flow @ RPM: |
Left Hand (CCW) |
| Seal Material: |
1 1/4 |
| Minor Diameter [Min: |
NPT |
| Pump Series: |
3/16 in |
| Port Size: |
11 |
| Pressure Port Size, Shaft End: |
9 gpm @ 1200 rpm |
| PDF |
|
Product Details
| Shaft Type |
18.0 LB |
| Displacement Shaft End (cu in/revolution) |
Flange Mount |
| Shaft End Flow @ RPM |
Left Hand (CCW) |
| Seal Material |
1 1/4 |
| Minor Diameter [Min |
NPT |
| Pump Series |
3/16 in |
| Port Size |
11 |
| Pressure Port Size, Shaft End |
9 gpm @ 1200 rpm |
| Minor Diameter |
0.75 in |
| Pressure Port Size, Cover End |
Straight w/ Key |
| Port Orientation - Shaft End |
13.5 gpm @ 1800 rpm |
| Integral Valve Configuration |
V20 |
| Spline Description |
2.66 in |
| Major Diameter [Min |
3/4 in NPT |
| Port Type |
Buna-N |
| Minor Diameter [Max |
2800 |
| GPM @ 1,800 rpm, Shaft End |
2500 psi |
| Max. RPM [Max |
13 1/2 |
| Cover End Pressure [Max |
P |
| Cover End RPM [Max |
SAE A, 2 Bolt |
| Model No. |
P |
| Shaft Dia. |
1 |
| Pilot Type |
90° CW from Inlet |
| Controlled Flow Rate |
1.81 |
| Relief Valve Setting |
w/o Integral Valves |
| Rotation |
1D |