PC200-3 Excavator S6D105 diesel engine cooling water pump 6136-62-1100
| Shaft Seal Type: |
35.0 LB |
| Shaft Length: |
Flange Mount |
| Spline Description: |
Left Hand (CCW) |
| Mounting Flange: |
V2020-1F13S6S-11AA30-LH |
| GPM @ 1,800 rpm, Shaft End: |
2 |
| Weight: |
Flange |
| Port Type: |
N/A |
| Pressure Port Size, Cover End: |
N/A |
| PDF |
|
Product Details
| Shaft Seal Type |
35.0 LB |
| Shaft Length |
Flange Mount |
| Spline Description |
Left Hand (CCW) |
| Mounting Flange |
V2020-1F13S6S-11AA30-LH |
| GPM @ 1,800 rpm, Shaft End |
2 |
| Weight |
Flange |
| Port Type |
N/A |
| Pressure Port Size, Cover End |
N/A |
| Model No. |
0.875 in |
| Shaft Dia. |
13 Tooth Splined |
| Relief Valve Setting |
V2020 |
| Minor Diameter |
1 5/16 in |
| Pilot Type |
Buna-N |
| GPM @ 1,800 rpm, Cover End |
2400 |
| Max. RPM [Max |
0.728 in |
| Manufacturer Part No. |
SAE B, 2 Bolt |
| Shaft End Pressure [Max |
Single Shaft Seal |
| Rotation |
16/32 |
| Shaft End RPM [Max |
3000 |
| Minor Diameter [Min |
2400 |
| Cover End RPM [Max |
N/A |
| Pressure Port Size, Shaft End |
6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm |
| Cover End Pressure [Max |
0.873 in |
| Controlled Flow Rate |
0.872 in |
| Port Size |
0.7335 in |
| Shaft Key |
0.7225 in |
| Port Orientation - Cover End |
N/A |
| Major Diameter [Min |
13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm |
| Minor Diameter [Max |
V2020-1F13S6S-11AA30-LH |
| Pump Series |
2500 |
| Shaft Type |
2200 |
| Mounting |
9 |
| Cover End Flow @ RPM |
19.5 |
| Shaft End Flow @ RPM |
N/A |
| Displacement Cover End (cu in/revolution) |
Outlet Opposite Inlet |
| Major Diameter [Max |
Outlet Opposite Inlet |
| Port Orientation - Shaft End |
3/4 in SAE O-Ring |
| Displacement Shaft End (cu in/revolution) |
3/4 in SAE O-Ring |
| Integral Valve Configuration |
1.19 |
| Seal Material |
2.59 |