Replace Caterpillar Wheel Loader 910 Hydraulic Gear Pump 8J8813
| Pressure Port Size, Shaft End: |
45.0 LB |
| Port Type: |
Flange Mount |
| Mounting Flange: |
Left Hand (CCW) |
| Max. RPM [Max: |
2520V17A11-11CA22L |
| Port Orientation - Cover End: |
2 1/2 |
| Integral Valve Configuration: |
Flange |
| Shaft End Flow @ RPM: |
N/A |
| Minor Diameter: |
Standard Pilot |
| PDF |
|
Product Details
| Pressure Port Size, Shaft End |
45.0 LB |
| Port Type |
Flange Mount |
| Mounting Flange |
Left Hand (CCW) |
| Max. RPM [Max |
2520V17A11-11CA22L |
| Port Orientation - Cover End |
2 1/2 |
| Integral Valve Configuration |
Flange |
| Shaft End Flow @ RPM |
N/A |
| Minor Diameter |
Standard Pilot |
| Spline Description |
1.09 in |
| Shaft Type |
13 Tooth Splined |
| Shaft End Pressure [Max |
2520V |
| Pressure Port Size, Cover End |
1 3/4 in |
| Major Diameter [Min |
Buna-N |
| GPM @ 1,800 rpm, Shaft End |
1800 |
| Pump Series |
0.7285 in |
| Cover End RPM [Max |
SAE B, 2 Bolt |
| Port Orientation - Shaft End |
Single Shaft Seal |
| Shaft Length |
16/32 |
| Manufacturer Part No. |
1800 |
| Seal Material |
1800 |
| Displacement Cover End (cu in/revolution) |
N/A |
| GPM @ 1,800 rpm, Cover End |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Minor Diameter [Min |
0.873 in |
| Shaft Dia. |
0.872 in |
| Cover End Pressure [Max |
0.734 in |
| Minor Diameter [Max |
0.723 in |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Cover End Flow @ RPM |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Mounting |
2520V17A11-11CA22L |
| Shaft Key |
3000 |
| Relief Valve Setting |
2500 |
| Pilot Type |
16.5 |
| Controlled Flow Rate |
25.5 |
| Shaft End RPM [Max |
N/A |
| Shaft Seal Type |
Outlet 135° CCW from Inlet |
| Major Diameter [Max |
Outlet Inline w/Inlet |
| Weight |
3/4 in Code 61 |
| Model No. |
1 in Code 61 |
| Port Size |
2.2 |
| Rotation |
3.4 |