HGP-2A Replace Hydromax Extrusion Oil Gear Pump HGP2A
| Pressure Port Size, Shaft End: |
75.0 LB |
| Minor Diameter [Min: |
Flange Mount |
| Shaft Length: |
Left Hand (CCW) |
| Mounting: |
3520VQ25A8-11DC20L |
| Max. RPM [Max: |
3 |
| Shaft Type: |
Flange |
| Displacement Shaft End (cu in/revolution): |
N/A |
| Shaft End RPM [Max: |
Standard Pilot |
| PDF |
|
Product Details
| Pressure Port Size, Shaft End |
75.0 LB |
| Minor Diameter [Min |
Flange Mount |
| Shaft Length |
Left Hand (CCW) |
| Mounting |
3520VQ25A8-11DC20L |
| Max. RPM [Max |
3 |
| Shaft Type |
Flange |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Shaft End RPM [Max |
Standard Pilot |
| Shaft End Flow @ RPM |
1.25 in |
| Relief Valve Setting |
14 Tooth Splined |
| Cover End Pressure [Max |
3520VQ |
| Pilot Type |
1 15/16 in |
| Pressure Port Size, Cover End |
Buna-N |
| Pump Series |
2500 |
| Port Type |
1.04 in |
| Seal Material |
SAE C, 2 Bolt |
| Minor Diameter [Max |
Single Shaft Seal |
| Manufacturer Part No. |
12/24 |
| Integral Valve Configuration |
2500 |
| Major Diameter [Min |
2500 |
| Port Orientation - Cover End |
N/A |
| Cover End Flow @ RPM |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Cover End |
1.248 in |
| Rotation |
1.247 in |
| Minor Diameter |
N/A |
| Port Size |
N/A |
| Shaft Dia. |
N/A |
| Model No. |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) |
3520VQ25A8-11DC20L |
| Cover End RPM [Max |
3000 |
| Weight |
3000 |
| Port Orientation - Shaft End |
12 |
| Major Diameter [Max |
37.5 |
| GPM @ 1,800 rpm, Shaft End |
w/o Integral Valves |
| Shaft End Pressure [Max |
Outlet 45° CW from Inlet |
| Controlled Flow Rate |
Outlet 90° CW from Inlet |
| Spline Description |
3/4 in Flange |
| Shaft Key |
1 1/4 in Flange |
| Shaft Seal Type |
1.67 |
| Mounting Flange |
4.98 |