3N2078 Tractor Fuel Pump For Caterpillar Engine Part D348 D349 D379
| Shaft Seal Type: |
30.0 LB |
| Rotation: |
Flange Mount |
| Displacement Cover End (cu in/revolution): |
Right Hand (CW) |
| GPM @ 1,800 rpm, Cover End: |
V2010-1F13S7S-11AD12 |
| Relief Valve Setting: |
1 1/2 |
| Cover End Pressure [Max: |
Flange |
| Minor Diameter [Min: |
N/A |
| Manufacturer Part No.: |
N/A |
| PDF |
|
Product Details
| Shaft Seal Type |
30.0 LB |
| Rotation |
Flange Mount |
| Displacement Cover End (cu in/revolution) |
Right Hand (CW) |
| GPM @ 1,800 rpm, Cover End |
V2010-1F13S7S-11AD12 |
| Relief Valve Setting |
1 1/2 |
| Cover End Pressure [Max |
Flange |
| Minor Diameter [Min |
N/A |
| Manufacturer Part No. |
N/A |
| Weight |
0.875 in |
| Controlled Flow Rate |
13 Tooth Splined |
| GPM @ 1,800 rpm, Shaft End |
V2010 |
| Max. RPM [Max |
1 5/16 in |
| Pressure Port Size, Shaft End |
Buna-N |
| Shaft End RPM [Max |
2400 |
| Shaft Type |
0.728 in |
| Integral Valve Configuration |
SAE B, 2 Bolt |
| Port Orientation - Shaft End |
Single Shaft Seal |
| Major Diameter [Min |
16/32 |
| Seal Material |
2800 |
| Shaft End Flow @ RPM |
2400 |
| Minor Diameter |
N/A |
| Spline Description |
7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Shaft Length |
0.873 in |
| Minor Diameter [Max |
0.872 in |
| Mounting |
0.7335 in |
| Model No. |
0.7225 in |
| Pressure Port Size, Cover End |
N/A |
| Pilot Type |
13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm |
| Shaft End Pressure [Max |
V2010-1F13S7S-11AD12 |
| Displacement Shaft End (cu in/revolution) |
2000 |
| Port Orientation - Cover End |
2200 |
| Cover End Flow @ RPM |
10.5 |
| Shaft Dia. |
19.5 |
| Major Diameter [Max |
N/A |
| Port Size |
Outlet 135° CW from Inlet |
| Port Type |
Outlet Opposite Inlet |
| Cover End RPM [Max |
1/2 in SAE O-Ring |
| Pump Series |
3/4 in SAE O-Ring |
| Shaft Key |
1.39 |
| Mounting Flange |
2.59 |