New Aftermarket PC225-7 Diesel Injection Fuel Feed Pump
| Spline Description: | 76.0 LB |
| Seal Material: | Flange Mount |
| Shaft Dia.: | Left Hand (CCW) |
| Minor Diameter [Max: | 3525VQ38A21-11AA20-LH |
| Integral Valve Configuration: | 3 |
| Pilot Type: | Flange |
| Displacement Cover End (cu in/revolution): | N/A |
| Major Diameter [Max: | Standard Pilot |
| PDF |
|
Product Details
| Spline Description | 76.0 LB |
| Seal Material | Flange Mount |
| Shaft Dia. | Left Hand (CCW) |
| Minor Diameter [Max | 3525VQ38A21-11AA20-LH |
| Integral Valve Configuration | 3 |
| Pilot Type | Flange |
| Displacement Cover End (cu in/revolution) | N/A |
| Major Diameter [Max | Standard Pilot |
| Cover End Pressure [Max | 1.25 in |
| Minor Diameter | 14 Tooth Splined |
| Shaft End Pressure [Max | 3525VQ |
| Controlled Flow Rate | 1.9375 in |
| Manufacturer Part No. | Double |
| Model No. | Buna-N |
| GPM @ 1,800 rpm, Cover End | 2400 |
| GPM @ 1,800 rpm, Shaft End | 1.04 in |
| Shaft End RPM [Max | SAE C, 2 Bolt |
| Displacement Shaft End (cu in/revolution) | 7.4 |
| Minor Diameter [Min | 12/24 |
| Pump Series | 2500 |
| Port Orientation - Cover End | 2400 |
| Pressure Port Size, Cover End | N/A |
| Shaft Type | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Mounting Flange | 1.248 in |
| Shaft Seal Type | 1.247 in |
| Port Type | N/A |
| Pressure Port Size, Shaft End | N/A |
| Mounting | N/A |
| Port Size | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Relief Valve Setting | 3525VQ38A21-11AA20-LH |
| Shaft End Flow @ RPM | 3000 |
| Port Orientation - Shaft End | 3000 |
| Rotation | 31.5 |
| Shaft Length | 57 |
| Shaft Key | w/o Integral Valves |
| Weight | Outlet 135° CCW from Inlet |
| Cover End RPM [Max | Outlet Opposite Inlet |
| Major Diameter [Min | 1 in Flange |
| Max. RPM [Max | 1 1/4 in Flange |
| Cover End Flow @ RPM | 4.1 |
PL42 PL44 Piston Shoe Hydraulic Motor Poclain Spare Parts