Eaton 74318-DAH Axial Piston Hydraulic Motor 74318
| Shaft End Pressure [Max: | 101.0 LB |
| Weight: | Flange Mount |
| Cover End RPM [Max: | Right Hand (CW) |
| Model No.: | 4525VQ60A21-11CC20 |
| Integral Valve Configuration: | 3.5 |
| Relief Valve Setting: | Flange |
| Port Type: | N/A |
| Minor Diameter [Min: | Standard Pilot |
| PDF |
|
Product Details
| Shaft End Pressure [Max | 101.0 LB |
| Weight | Flange Mount |
| Cover End RPM [Max | Right Hand (CW) |
| Model No. | 4525VQ60A21-11CC20 |
| Integral Valve Configuration | 3.5 |
| Relief Valve Setting | Flange |
| Port Type | N/A |
| Minor Diameter [Min | Standard Pilot |
| Shaft Seal Type | 1.25 in |
| Shaft Dia. | 14 Tooth Splined |
| Shaft Key | 4525VQ |
| Displacement Cover End (cu in/revolution) | 1.9375 in |
| Pressure Port Size, Cover End | Double |
| Shaft End Flow @ RPM | Buna-N |
| Shaft Type | 2200 |
| Mounting Flange | 1.04 in |
| Cover End Pressure [Max | SAE C, 2 Bolt |
| GPM @ 1,800 rpm, Shaft End | Single Shaft Seal |
| GPM @ 1,800 rpm, Cover End | 12/24 |
| Minor Diameter [Max | 2200 |
| Seal Material | 2200 |
| Pilot Type | N/A |
| Shaft Length | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Pump Series | 1.248 in |
| Pressure Port Size, Shaft End | 1.247 in |
| Shaft End RPM [Max | N/A |
| Mounting | N/A |
| Spline Description | N/A |
| Major Diameter [Max | 60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) | 11.8 |
| Rotation | 3000 |
| Manufacturer Part No. | 2500 |
| Major Diameter [Min | 31.5 |
| Max. RPM [Max | 90 |
| Cover End Flow @ RPM | w/o Integral Valves |
| Port Orientation - Cover End | Outlet 45° CW from Inlet |
| Port Orientation - Shaft End | Outlet Inline w/Inlet |
| Port Size | 1 in Flange |
| Minor Diameter | 1 1/2 in Flange |
| Controlled Flow Rate | 4.1 |
PL42 PL44 Piston Shoe Hydraulic Motor Poclain Spare Parts