char lynn Eaton 103-1083-012/103-1083 Hydraulic Motor BMRS100
Mounting: | 45.0 LB |
Displacement Shaft End (cu in/revolution): | Flange Mount |
GPM @ 1,800 rpm, Shaft End: | Left Hand (CCW) |
Shaft Type: | 2520V12A8-11CC22L |
Minor Diameter [Min: | 2 1/2 |
Controlled Flow Rate: | Flange |
Max. RPM [Max: | N/A |
Pump Series: | Standard Pilot |
PDF |
|
Product Details
Mounting | 45.0 LB |
Displacement Shaft End (cu in/revolution) | Flange Mount |
GPM @ 1,800 rpm, Shaft End | Left Hand (CCW) |
Shaft Type | 2520V12A8-11CC22L |
Minor Diameter [Min | 2 1/2 |
Controlled Flow Rate | Flange |
Max. RPM [Max | N/A |
Pump Series | Standard Pilot |
Minor Diameter | 1.09 in |
Port Orientation - Shaft End | 13 Tooth Splined |
Relief Valve Setting | 2520V |
Major Diameter [Max | 1.75 in |
Pressure Port Size, Cover End | Buna-N |
Weight | 1800 |
Cover End RPM [Max | 0.7285 in |
Port Size | SAE B, 2 Bolt |
Shaft Dia. | Single Shaft Seal |
Shaft Length | 16/32 |
Port Orientation - Cover End | 1800 |
Displacement Cover End (cu in/revolution) | 1800 |
GPM @ 1,800 rpm, Cover End | N/A |
Pilot Type | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
Minor Diameter [Max | 0.873 in |
Shaft End RPM [Max | 0.872 in |
Pressure Port Size, Shaft End | 0.734 in |
Cover End Flow @ RPM | 0.723 in |
Manufacturer Part No. | N/A |
Integral Valve Configuration | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
Spline Description | 2520V12A8-11CC22L |
Shaft End Flow @ RPM | 3000 |
Model No. | 2500 |
Shaft Key | 12 |
Port Type | 18 |
Rotation | N/A |
Mounting Flange | Outlet 45° CW from Inlet |
Major Diameter [Min | Outlet Inline w/Inlet |
Shaft Seal Type | 3/4 in Code 61 |
Shaft End Pressure [Max | 1 in Code 61 |
Seal Material | 1.7 |
Cover End Pressure [Max | 2.5 |