HGP333A HGP-333A Gear Type 3 Stage Hydraulic Pump
| Weight: | 18.0 LB |
| Port Type: | Flange Mount |
| Max. RPM [Max: | Right Hand (CW) |
| Pressure Port Size, Shaft End: | 11 gal/min @ 1200 rpm |
| Shaft Seal Type: | 1.25 |
| GPM @ 1,800 rpm, Cover End: | BSPP |
| Shaft Key: | 3/16 in |
| Major Diameter [Min: | 11 |
| PDF |
|
Product Details
| Weight | 18.0 LB |
| Port Type | Flange Mount |
| Max. RPM [Max | Right Hand (CW) |
| Pressure Port Size, Shaft End | 11 gal/min @ 1200 rpm |
| Shaft Seal Type | 1.25 |
| GPM @ 1,800 rpm, Cover End | BSPP |
| Shaft Key | 3/16 in |
| Major Diameter [Min | 11 |
| Minor Diameter [Max | 11 gpm @ 1200 rpm |
| Seal Material | 11 |
| Minor Diameter | 0.75 in |
| Major Diameter [Max | Straight w/ Key |
| Shaft Dia. | 16.5 gpm @ 1800 rpm |
| Controlled Flow Rate | V20 |
| Port Size | 2.66 in |
| Pilot Type | Single |
| Cover End Flow @ RPM | 3/4 in BSPP |
| Cover End Pressure [Max | Buna-N |
| Model No. | 2500 |
| Minor Diameter [Min | 2500 psi |
| Mounting | 16 1/2 |
| Port Orientation - Cover End | B |
| Rotation | SAE A, 2 Bolt |
| Relief Valve Setting | B |
| Shaft End RPM [Max | 1 |
| Integral Valve Configuration | Opposite Inlet Port |
| Displacement Cover End (cu in/revolution) | 2.2 |
| Spline Description | w/o Integral Valves |
| Manufacturer Part No. | 1A |
MSE02 Stator for Poclain Radial Piston Hydraulic motor parts