HGP222A/HGP-222A Gear Pump Triple Hydraulic
| Shaft Key: | 76.0 LB |
| Seal Material: | Flange Mount |
| Controlled Flow Rate: | Left Hand (CCW) |
| Pressure Port Size, Cover End: | 3525VQ38A21-11AA20-LH |
| Mounting: | 3 |
| Displacement Shaft End (cu in/revolution): | 7.4 |
| Mounting Flange: | N/A |
| Shaft Seal Type: | Standard Pilot |
| PDF |
|
Product Details
| Shaft Key | 76.0 LB |
| Seal Material | Flange Mount |
| Controlled Flow Rate | Left Hand (CCW) |
| Pressure Port Size, Cover End | 3525VQ38A21-11AA20-LH |
| Mounting | 3 |
| Displacement Shaft End (cu in/revolution) | 7.4 |
| Mounting Flange | N/A |
| Shaft Seal Type | Standard Pilot |
| Relief Valve Setting | 1.25 in |
| Shaft Type | 14 Tooth Splined |
| Pressure Port Size, Shaft End | 3525VQ |
| Shaft Dia. | 1.9375 in |
| Minor Diameter | Double |
| Shaft End Pressure [Max | Buna-N |
| Port Size | 2400 |
| Max. RPM [Max | 1.04 in |
| Integral Valve Configuration | SAE C, 2 Bolt |
| Manufacturer Part No. | Single Shaft Seal |
| Spline Description | 12/24 |
| Model No. | 2500 |
| Shaft Length | 2400 |
| Major Diameter [Max | N/A |
| Minor Diameter [Max | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Shaft End Flow @ RPM | 1.248 in |
| Shaft End RPM [Max | 1.247 in |
| GPM @ 1,800 rpm, Cover End | N/A |
| Port Orientation - Cover End | N/A |
| Cover End RPM [Max | N/A |
| Port Orientation - Shaft End | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Rotation | 3525VQ38A21-11AA20-LH |
| Weight | 3000 |
| GPM @ 1,800 rpm, Shaft End | 3000 |
| Cover End Pressure [Max | 31.5 |
| Displacement Cover End (cu in/revolution) | 57 |
| Major Diameter [Min | w/o Integral Valves |
| Cover End Flow @ RPM | Outlet 135° CCW from Inlet |
| Minor Diameter [Min | Outlet Opposite Inlet |
| Pilot Type | 1 in Flange |
| Pump Series | 1 1/4 in Flange |
| Port Type | 4.1 |
Low Speed BMP100 Hydraulic Orbit Motor For Replace Sauer