Eaton Orbit Hydraulic Motor 101-1035-009/101-1035 BMPH100 Hydromotor
| Shaft Length: | 35.0 LB |
| Seal Material: | Flange Mount |
| Mounting: | Right Hand (CW) |
| GPM @ 1,800 rpm, Shaft End: | V2020-1F9S7S-11DD30 |
| Shaft End RPM [Max: | 2 |
| Shaft Seal Type: | Flange |
| Minor Diameter: | N/A |
| Shaft End Flow @ RPM: | N/A |
| PDF |
|
Product Details
| Shaft Length | 35.0 LB |
| Seal Material | Flange Mount |
| Mounting | Right Hand (CW) |
| GPM @ 1,800 rpm, Shaft End | V2020-1F9S7S-11DD30 |
| Shaft End RPM [Max | 2 |
| Shaft Seal Type | Flange |
| Minor Diameter | N/A |
| Shaft End Flow @ RPM | N/A |
| Major Diameter [Max | 0.875 in |
| Shaft End Pressure [Max | 13 Tooth Splined |
| Port Type | V2020 |
| Displacement Shaft End (cu in/revolution) | 1 5/16 in |
| Rotation | Buna-N |
| Controlled Flow Rate | 2800 |
| Port Orientation - Shaft End | 0.728 in |
| Shaft Key | SAE B, 2 Bolt |
| Relief Valve Setting | Single Shaft Seal |
| Pressure Port Size, Cover End | 16/32 |
| Mounting Flange | 2500 |
| Displacement Cover End (cu in/revolution) | 2800 |
| Pilot Type | N/A |
| Manufacturer Part No. | 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Major Diameter [Min | 0.873 in |
| Weight | 0.872 in |
| Shaft Dia. | 0.7335 in |
| Model No. | 0.7225 in |
| Shaft Type | N/A |
| GPM @ 1,800 rpm, Cover End | 9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm |
| Max. RPM [Max | V2020-1F9S7S-11DD30 |
| Minor Diameter [Min | 2500 |
| Minor Diameter [Max | 2500 |
| Integral Valve Configuration | 10.5 |
| Pump Series | 13.5 |
| Spline Description | N/A |
| Port Orientation - Cover End | Outlet 90° CW from Inlet |
| Pressure Port Size, Shaft End | Outlet 90° CW from Inlet |
| Cover End RPM [Max | 3/4 in SAE O-Ring |
| Cover End Pressure [Max | 3/4 in SAE O-Ring |
| Cover End Flow @ RPM | 1.39 |
| Port Size | 1.81 |
Low Speed BMP100 Hydraulic Orbit Motor For Replace Sauer