Charging Pump PC200-6 PC300-6 Excavator Pilot Pump
| Minor Diameter [Max: | 18.0 LB |
| Manufacturer Part No.: | Flange Mount |
| Displacement Cover End (cu in/revolution): | Right Hand (CW) |
| Cover End Flow @ RPM: | 6 gal/min @ 1200 rpm |
| Displacement Shaft End (cu in/revolution): | 1.25 |
| Shaft Type: | NPT |
| Port Type: | N/A |
| Pressure Port Size, Shaft End: | 22 |
| PDF |
|
Product Details
| Minor Diameter [Max | 18.0 LB |
| Manufacturer Part No. | Flange Mount |
| Displacement Cover End (cu in/revolution) | Right Hand (CW) |
| Cover End Flow @ RPM | 6 gal/min @ 1200 rpm |
| Displacement Shaft End (cu in/revolution) | 1.25 |
| Shaft Type | NPT |
| Port Type | N/A |
| Pressure Port Size, Shaft End | 22 |
| Port Orientation - Cover End | 6 gpm @ 1200 rpm |
| Shaft End RPM [Max | 0.73 in |
| GPM @ 1,800 rpm, Shaft End | 11 Tooth Splined |
| Shaft Seal Type | 9 / 1750 |
| Seal Material | V20 |
| Port Size | 1.25 in |
| Shaft End Pressure [Max | Single |
| Cover End Pressure [Max | 3/4 in NPT |
| Max. RPM [Max | Buna-N |
| Weight | 3400 |
| Integral Valve Configuration | 2500 psi |
| Mounting Flange | 9 |
| Relief Valve Setting | P |
| Pump Series | SAE A, 2 Bolt |
| Spline Description | P |
| Shaft End Flow @ RPM | 1 |
| Minor Diameter [Min | 90° CCW from Inlet |
| Port Orientation - Shaft End | 1.2 |
| Major Diameter [Max | 5 gal/min |
| Pressure Port Size, Cover End | Flow Control & Relief |
| Shaft Dia. | 1750 psi |
| Pilot Type | 38B |
MSE18 Stator Cam Ring for Poclain Radial Piston Hydraulic Motor