CAT 12G 120G 130G 140G 160G Grader Main Piston Pump Valve Plate 9J5758 9J2516
| Major Diameter [Max: | 45.0 LB |
| Model No.: | Flange Mount |
| Shaft Key: | Right Hand (CW) |
| Displacement Cover End (cu in/revolution): | 2520VQ21A14-11CB20 |
| Relief Valve Setting: | 2 1/2 |
| GPM @ 1,800 rpm, Cover End: | Flange |
| Minor Diameter [Min: | N/A |
| Weight: | Standard Pilot |
| PDF |
|
Product Details
| Major Diameter [Max | 45.0 LB |
| Model No. | Flange Mount |
| Shaft Key | Right Hand (CW) |
| Displacement Cover End (cu in/revolution) | 2520VQ21A14-11CB20 |
| Relief Valve Setting | 2 1/2 |
| GPM @ 1,800 rpm, Cover End | Flange |
| Minor Diameter [Min | N/A |
| Weight | Standard Pilot |
| Shaft End Flow @ RPM | 0.875 in |
| Pilot Type | 13 Tooth Splined |
| Displacement Shaft End (cu in/revolution) | 2520VQ |
| Cover End RPM [Max | 1.375 in |
| Port Orientation - Shaft End | Buna-N |
| Mounting | 2500 |
| Minor Diameter [Max | 0.715 in |
| Controlled Flow Rate | SAE B, 2 Bolt |
| Spline Description | Single Shaft Seal |
| Minor Diameter | 16/32 |
| Pressure Port Size, Cover End | 2700 |
| Rotation | 2500 |
| Max. RPM [Max | N/A |
| Shaft Seal Type | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End | 0.873 in |
| Port Size | 0.872 in |
| Shaft End RPM [Max | N/A |
| Pump Series | N/A |
| Shaft Dia. | N/A |
| Major Diameter [Min | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Shaft End Pressure [Max | 2520VQ21A14-11CB20 |
| Port Type | 2000 |
| Integral Valve Configuration | 3000 |
| Cover End Pressure [Max | 21 |
| Shaft Type | 31.5 |
| Pressure Port Size, Shaft End | w/o Integral Valves |
| Seal Material | Outlet 45° CCW from Inlet |
| Cover End Flow @ RPM | Outlet Inline w/Inlet |
| Port Orientation - Cover End | 3/4 in Flange |
| Manufacturer Part No. | 1 in Flange |
| Shaft Length | 2.8 |
| Mounting Flange | 4.12 |
PL42 PL44 Poclain Spare Parts Hydraulic Motor Piston Pin