PC200-3 Excavator S6D105 diesel engine cooling water pump 6136-62-1100
| Shaft Seal Type: | 35.0 LB |
| Shaft Length: | Flange Mount |
| Spline Description: | Left Hand (CCW) |
| Mounting Flange: | V2020-1F13S6S-11AA30-LH |
| GPM @ 1,800 rpm, Shaft End: | 2 |
| Weight: | Flange |
| Port Type: | N/A |
| Pressure Port Size, Cover End: | N/A |
| PDF |
|
Product Details
| Shaft Seal Type | 35.0 LB |
| Shaft Length | Flange Mount |
| Spline Description | Left Hand (CCW) |
| Mounting Flange | V2020-1F13S6S-11AA30-LH |
| GPM @ 1,800 rpm, Shaft End | 2 |
| Weight | Flange |
| Port Type | N/A |
| Pressure Port Size, Cover End | N/A |
| Model No. | 0.875 in |
| Shaft Dia. | 13 Tooth Splined |
| Relief Valve Setting | V2020 |
| Minor Diameter | 1 5/16 in |
| Pilot Type | Buna-N |
| GPM @ 1,800 rpm, Cover End | 2400 |
| Max. RPM [Max | 0.728 in |
| Manufacturer Part No. | SAE B, 2 Bolt |
| Shaft End Pressure [Max | Single Shaft Seal |
| Rotation | 16/32 |
| Shaft End RPM [Max | 3000 |
| Minor Diameter [Min | 2400 |
| Cover End RPM [Max | N/A |
| Pressure Port Size, Shaft End | 6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm |
| Cover End Pressure [Max | 0.873 in |
| Controlled Flow Rate | 0.872 in |
| Port Size | 0.7335 in |
| Shaft Key | 0.7225 in |
| Port Orientation - Cover End | N/A |
| Major Diameter [Min | 13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm |
| Minor Diameter [Max | V2020-1F13S6S-11AA30-LH |
| Pump Series | 2500 |
| Shaft Type | 2200 |
| Mounting | 9 |
| Cover End Flow @ RPM | 19.5 |
| Shaft End Flow @ RPM | N/A |
| Displacement Cover End (cu in/revolution) | Outlet Opposite Inlet |
| Major Diameter [Max | Outlet Opposite Inlet |
| Port Orientation - Shaft End | 3/4 in SAE O-Ring |
| Displacement Shaft End (cu in/revolution) | 3/4 in SAE O-Ring |
| Integral Valve Configuration | 1.19 |
| Seal Material | 2.59 |
Micro Orbitrol Hydraulic torque Motors BMP100 OMP100 Orbitale