| Port Orientation - Shaft End | 75.0 LB |
| Seal Material | Flange Mount |
| Shaft End RPM [Max | Right Hand (CW) |
| Manufacturer Part No. | 3520VQ38A11-11BB20 |
| Minor Diameter [Max | 3 |
| Cover End RPM [Max | Flange |
| Shaft Key | N/A |
| Mounting | Standard Pilot |
| Major Diameter [Min | 1.25 in |
| Minor Diameter | 14 Tooth Splined |
| Shaft Seal Type | 3520VQ |
| Cover End Pressure [Max | 1 15/16 in |
| Controlled Flow Rate | Buna-N |
| Minor Diameter [Min | 2400 |
| Weight | 1.04 in |
| GPM @ 1,800 rpm, Shaft End | SAE C, 2 Bolt |
| Cover End Flow @ RPM | Single Shaft Seal |
| Displacement Shaft End (cu in/revolution) | 12/24 |
| Port Size | 2500 |
| Shaft Length | 2400 |
| Spline Description | N/A |
| Pump Series | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Integral Valve Configuration | 1.248 in |
| Pressure Port Size, Shaft End | 1.247 in |
| Max. RPM [Max | N/A |
| Displacement Cover End (cu in/revolution) | N/A |
| Shaft Type | N/A |
| Model No. | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Mounting Flange | 3520VQ38A11-11BB20 |
| Shaft End Pressure [Max | 3000 |
| Major Diameter [Max | 3000 |
| Port Orientation - Cover End | 16.5 |
| Rotation | 57 |
| Pressure Port Size, Cover End | w/o Integral Valves |
| GPM @ 1,800 rpm, Cover End | Outlet 45° CCW from Inlet |
| Shaft End Flow @ RPM | Outlet 90° CCW from Inlet |
| Port Type | 3/4 in Flange |
| Relief Valve Setting | 1 1/4 in Flange |
| Shaft Dia. | 2.22 |
| Pilot Type | 7.42 |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80