Replace Caterpillar Wheel Loader 910 Hydraulic Gear Pump 8J8813
| Pressure Port Size, Shaft End: | 45.0 LB |
| Port Type: | Flange Mount |
| Mounting Flange: | Left Hand (CCW) |
| Max. RPM [Max: | 2520V17A11-11CA22L |
| Port Orientation - Cover End: | 2 1/2 |
| Integral Valve Configuration: | Flange |
| Shaft End Flow @ RPM: | N/A |
| Minor Diameter: | Standard Pilot |
| PDF |
|
Product Details
| Pressure Port Size, Shaft End | 45.0 LB |
| Port Type | Flange Mount |
| Mounting Flange | Left Hand (CCW) |
| Max. RPM [Max | 2520V17A11-11CA22L |
| Port Orientation - Cover End | 2 1/2 |
| Integral Valve Configuration | Flange |
| Shaft End Flow @ RPM | N/A |
| Minor Diameter | Standard Pilot |
| Spline Description | 1.09 in |
| Shaft Type | 13 Tooth Splined |
| Shaft End Pressure [Max | 2520V |
| Pressure Port Size, Cover End | 1 3/4 in |
| Major Diameter [Min | Buna-N |
| GPM @ 1,800 rpm, Shaft End | 1800 |
| Pump Series | 0.7285 in |
| Cover End RPM [Max | SAE B, 2 Bolt |
| Port Orientation - Shaft End | Single Shaft Seal |
| Shaft Length | 16/32 |
| Manufacturer Part No. | 1800 |
| Seal Material | 1800 |
| Displacement Cover End (cu in/revolution) | N/A |
| GPM @ 1,800 rpm, Cover End | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Minor Diameter [Min | 0.873 in |
| Shaft Dia. | 0.872 in |
| Cover End Pressure [Max | 0.734 in |
| Minor Diameter [Max | 0.723 in |
| Displacement Shaft End (cu in/revolution) | N/A |
| Cover End Flow @ RPM | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Mounting | 2520V17A11-11CA22L |
| Shaft Key | 3000 |
| Relief Valve Setting | 2500 |
| Pilot Type | 16.5 |
| Controlled Flow Rate | 25.5 |
| Shaft End RPM [Max | N/A |
| Shaft Seal Type | Outlet 135° CCW from Inlet |
| Major Diameter [Max | Outlet Inline w/Inlet |
| Weight | 3/4 in Code 61 |
| Model No. | 1 in Code 61 |
| Port Size | 2.2 |
| Rotation | 3.4 |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80