Hydstar Selling CAT Excavator Fuel Filter 422-7587 4227587
| Minor Diameter [Min: | 45.0 LB |
| Displacement Cover End (cu in/revolution): | Flange Mount |
| GPM @ 1,800 rpm, Shaft End: | Right Hand (CW) |
| GPM @ 1,800 rpm, Cover End: | 2520VQ21E11-11DD20 |
| Mounting Flange: | 2 1/2 |
| Max. RPM [Max: | Flange |
| Shaft Length: | N/A |
| Port Orientation - Shaft End: | Standard Pilot |
| PDF |
|
Product Details
| Minor Diameter [Min | 45.0 LB |
| Displacement Cover End (cu in/revolution) | Flange Mount |
| GPM @ 1,800 rpm, Shaft End | Right Hand (CW) |
| GPM @ 1,800 rpm, Cover End | 2520VQ21E11-11DD20 |
| Mounting Flange | 2 1/2 |
| Max. RPM [Max | Flange |
| Shaft Length | N/A |
| Port Orientation - Shaft End | Standard Pilot |
| Pressure Port Size, Cover End | 0.875 in |
| Pump Series | 13 Tooth Splined |
| Port Orientation - Cover End | 2520VQ |
| Seal Material | 1 3/8 in |
| Port Type | Buna-N |
| Model No. | 2500 |
| Controlled Flow Rate | 0.715 in |
| Shaft Seal Type | SAE B, 2 Bolt |
| Rotation | Single Shaft Seal |
| Cover End Flow @ RPM | 16/32 |
| Major Diameter [Min | 2700 |
| Shaft End Pressure [Max | 2500 |
| Pressure Port Size, Shaft End | N/A |
| Shaft End RPM [Max | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Minor Diameter [Max | 0.873 in |
| Relief Valve Setting | 0.872 in |
| Cover End Pressure [Max | N/A |
| Displacement Shaft End (cu in/revolution) | N/A |
| Shaft Key | N/A |
| Manufacturer Part No. | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Shaft Type | 2520VQ21E11-11DD20 |
| Integral Valve Configuration | 3000 |
| Major Diameter [Max | 3000 |
| Weight | 16.5 |
| Mounting | 31.5 |
| Cover End RPM [Max | w/o Integral Valves |
| Minor Diameter | Outlet 135° CW from Inlet |
| Port Size | Outlet 90° CW from Inlet |
| Spline Description | 1 1/16 in SAE O-Ring |
| Shaft End Flow @ RPM | 1 in Flange |
| Shaft Dia. | 2.22 |
| Pilot Type | 4.12 |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80