D135A;D155A Bulldozer Gear Hydraulic Scavenge Pump 175-13-23500
| Pilot Type: | 45.0 LB |
| GPM @ 1,800 rpm, Cover End: | Flange Mount |
| Shaft Key: | Right Hand (CW) |
| Cover End RPM [Max: | 2520V17A5-11CC22R |
| Major Diameter [Max: | 2 1/2 |
| Shaft End RPM [Max: | Flange |
| Manufacturer Part No.: | N/A |
| Shaft End Pressure [Max: | Standard Pilot |
| PDF |
|
Product Details
| Pilot Type | 45.0 LB |
| GPM @ 1,800 rpm, Cover End | Flange Mount |
| Shaft Key | Right Hand (CW) |
| Cover End RPM [Max | 2520V17A5-11CC22R |
| Major Diameter [Max | 2 1/2 |
| Shaft End RPM [Max | Flange |
| Manufacturer Part No. | N/A |
| Shaft End Pressure [Max | Standard Pilot |
| Controlled Flow Rate | 1.09 in |
| Pump Series | 13 Tooth Splined |
| Port Size | 2520V |
| Weight | 1 3/4 in |
| Pressure Port Size, Shaft End | Buna-N |
| Max. RPM [Max | 1800 |
| Displacement Shaft End (cu in/revolution) | 0.7285 in |
| Port Orientation - Shaft End | SAE B, 2 Bolt |
| GPM @ 1,800 rpm, Shaft End | Single Shaft Seal |
| Shaft Dia. | 16/32 |
| Integral Valve Configuration | 1800 |
| Port Orientation - Cover End | 1800 |
| Minor Diameter [Max | N/A |
| Shaft Length | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Mounting Flange | 0.873 in |
| Cover End Flow @ RPM | 0.872 in |
| Mounting | 0.734 in |
| Rotation | 0.723 in |
| Spline Description | N/A |
| Major Diameter [Min | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) | 2520V17A5-11CC22R |
| Pressure Port Size, Cover End | 3000 |
| Minor Diameter | 2500 |
| Shaft End Flow @ RPM | 7.5 |
| Relief Valve Setting | 25.5 |
| Port Type | N/A |
| Shaft Seal Type | Outlet 45° CW from Inlet |
| Shaft Type | Outlet Inline w/Inlet |
| Seal Material | 3/4 in Code 61 |
| Cover End Pressure [Max | 1 in Code 61 |
| Model No. | 1.1 |
| Minor Diameter [Min | 3.4 |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80