hydraulic gear oil pump 705-56-34630 For Dump Truck HD465-7 HD605-7
| Manufacturer Part No.: | 76.0 LB |
| Minor Diameter [Max: | Flange Mount |
| GPM @ 1,800 rpm, Shaft End: | Right Hand (CW) |
| Mounting: | 3525VQ25A21-11DD20 |
| Max. RPM [Max: | 3 |
| Cover End RPM [Max: | Flange |
| Port Size: | N/A |
| Weight: | Standard Pilot |
| PDF |
|
Product Details
| Manufacturer Part No. | 76.0 LB |
| Minor Diameter [Max | Flange Mount |
| GPM @ 1,800 rpm, Shaft End | Right Hand (CW) |
| Mounting | 3525VQ25A21-11DD20 |
| Max. RPM [Max | 3 |
| Cover End RPM [Max | Flange |
| Port Size | N/A |
| Weight | Standard Pilot |
| Seal Material | 1.25 in |
| Displacement Shaft End (cu in/revolution) | 14 Tooth Splined |
| Pilot Type | 3525VQ |
| Cover End Flow @ RPM | 1 15/16 in |
| Major Diameter [Min | Buna-N |
| Rotation | 2500 |
| Cover End Pressure [Max | 1.04 in |
| Shaft Length | SAE C, 2 Bolt |
| Shaft End RPM [Max | Single Shaft Seal |
| GPM @ 1,800 rpm, Cover End | 12/24 |
| Port Orientation - Cover End | 2500 |
| Displacement Cover End (cu in/revolution) | 2500 |
| Shaft Type | N/A |
| Relief Valve Setting | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Pressure Port Size, Shaft End | 1.248 in |
| Shaft End Flow @ RPM | 1.247 in |
| Minor Diameter [Min | N/A |
| Shaft Dia. | N/A |
| Mounting Flange | N/A |
| Shaft Key | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Minor Diameter | 3525VQ25A21-11DD20 |
| Model No. | 3000 |
| Port Orientation - Shaft End | 3000 |
| Integral Valve Configuration | 31.5 |
| Port Type | 37.5 |
| Shaft End Pressure [Max | w/o Integral Valves |
| Pressure Port Size, Cover End | Outlet 135° CW from Inlet |
| Pump Series | Outlet 90° CW from Inlet |
| Major Diameter [Max | 1 in Flange |
| Shaft Seal Type | 1 1/4 in Flange |
| Controlled Flow Rate | 4.12 |
| Spline Description | 4.98 |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80