HGP-2A Replace Hydromax Extrusion Oil Gear Pump HGP2A
| Pressure Port Size, Shaft End: | 75.0 LB |
| Minor Diameter [Min: | Flange Mount |
| Shaft Length: | Left Hand (CCW) |
| Mounting: | 3520VQ25A8-11DC20L |
| Max. RPM [Max: | 3 |
| Shaft Type: | Flange |
| Displacement Shaft End (cu in/revolution): | N/A |
| Shaft End RPM [Max: | Standard Pilot |
| PDF |
|
Product Details
| Pressure Port Size, Shaft End | 75.0 LB |
| Minor Diameter [Min | Flange Mount |
| Shaft Length | Left Hand (CCW) |
| Mounting | 3520VQ25A8-11DC20L |
| Max. RPM [Max | 3 |
| Shaft Type | Flange |
| Displacement Shaft End (cu in/revolution) | N/A |
| Shaft End RPM [Max | Standard Pilot |
| Shaft End Flow @ RPM | 1.25 in |
| Relief Valve Setting | 14 Tooth Splined |
| Cover End Pressure [Max | 3520VQ |
| Pilot Type | 1 15/16 in |
| Pressure Port Size, Cover End | Buna-N |
| Pump Series | 2500 |
| Port Type | 1.04 in |
| Seal Material | SAE C, 2 Bolt |
| Minor Diameter [Max | Single Shaft Seal |
| Manufacturer Part No. | 12/24 |
| Integral Valve Configuration | 2500 |
| Major Diameter [Min | 2500 |
| Port Orientation - Cover End | N/A |
| Cover End Flow @ RPM | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Cover End | 1.248 in |
| Rotation | 1.247 in |
| Minor Diameter | N/A |
| Port Size | N/A |
| Shaft Dia. | N/A |
| Model No. | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) | 3520VQ25A8-11DC20L |
| Cover End RPM [Max | 3000 |
| Weight | 3000 |
| Port Orientation - Shaft End | 12 |
| Major Diameter [Max | 37.5 |
| GPM @ 1,800 rpm, Shaft End | w/o Integral Valves |
| Shaft End Pressure [Max | Outlet 45° CW from Inlet |
| Controlled Flow Rate | Outlet 90° CW from Inlet |
| Spline Description | 3/4 in Flange |
| Shaft Key | 1 1/4 in Flange |
| Shaft Seal Type | 1.67 |
| Mounting Flange | 4.98 |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80