1080502 Rotor and Ring Kit for Hydraulic Triple Pump Rear Part
Cover End Pressure [Max: | 45.0 LB |
Minor Diameter: | Flange Mount |
Shaft Seal Type: | Left Hand (CCW) |
Pressure Port Size, Cover End: | 2520VQ21A12-11BC20-LH |
Major Diameter [Min: | 2.5 |
Model No.: | Flange |
GPM @ 1,800 rpm, Shaft End: | N/A |
Spline Description: | Standard Pilot |
PDF |
|
Product Details
Cover End Pressure [Max | 45.0 LB |
Minor Diameter | Flange Mount |
Shaft Seal Type | Left Hand (CCW) |
Pressure Port Size, Cover End | 2520VQ21A12-11BC20-LH |
Major Diameter [Min | 2.5 |
Model No. | Flange |
GPM @ 1,800 rpm, Shaft End | N/A |
Spline Description | Standard Pilot |
Minor Diameter [Min | 0.875 in |
Shaft Key | 13 Tooth Splined |
Manufacturer Part No. | 2520VQ |
Cover End Flow @ RPM | 1 3/8 in |
Pressure Port Size, Shaft End | Double |
Cover End RPM [Max | Buna-N |
Shaft Dia. | 2500 |
Minor Diameter [Max | 0.715 in |
Pilot Type | SAE B, 2 Bolt |
GPM @ 1,800 rpm, Cover End | Single Shaft Seal |
Shaft End Flow @ RPM | 16/32 |
Mounting Flange | 2700 |
Weight | 2500 |
Seal Material | N/A |
Major Diameter [Max | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
Shaft Type | 0.873 in |
Rotation | 0.872 in |
Port Type | N/A |
Mounting | N/A |
Pump Series | N/A |
Integral Valve Configuration | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Displacement Shaft End (cu in/revolution) | 4.1 |
Shaft End Pressure [Max | 2300 |
Port Orientation - Cover End | 3000 |
Displacement Cover End (cu in/revolution) | 18 |
Controlled Flow Rate | 31.5 |
Port Orientation - Shaft End | w/o Integral Valves |
Port Size | Outlet 45° CW from Inlet |
Max. RPM [Max | Outlet 90° CCW from Inlet |
Relief Valve Setting | 3/4 in Flange |
Shaft End RPM [Max | 1 in Flange |
Shaft Length | 2.4 |