6E4221 Swash Plate Group for Cat Motor Grader 14G/16G Hydraulic Main Pump
| Major Diameter [Max: | 35.0 LB |
| Minor Diameter [Max: | Flange Mount |
| Displacement Cover End (cu in/revolution): | Right Hand (CW) |
| Shaft End Pressure [Max: | V2020-1F11S6S-11BB30 |
| Spline Description: | 2 |
| Shaft End Flow @ RPM: | Flange |
| Controlled Flow Rate: | N/A |
| Mounting: | N/A |
| PDF |
|
Product Details
| Major Diameter [Max | 35.0 LB |
| Minor Diameter [Max | Flange Mount |
| Displacement Cover End (cu in/revolution) | Right Hand (CW) |
| Shaft End Pressure [Max | V2020-1F11S6S-11BB30 |
| Spline Description | 2 |
| Shaft End Flow @ RPM | Flange |
| Controlled Flow Rate | N/A |
| Mounting | N/A |
| Port Orientation - Shaft End | 0.875 in |
| Shaft Key | 13 Tooth Splined |
| GPM @ 1,800 rpm, Cover End | V2020 |
| Manufacturer Part No. | 1 5/16 in |
| Pilot Type | Buna-N |
| Displacement Shaft End (cu in/revolution) | 2500 |
| Rotation | 0.728 in |
| Cover End RPM [Max | SAE B, 2 Bolt |
| Minor Diameter | Single Shaft Seal |
| Port Type | 16/32 |
| Seal Material | 3000 |
| Port Size | 2500 |
| Shaft Dia. | N/A |
| Port Orientation - Cover End | 6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm |
| Shaft Seal Type | 0.873 in |
| Integral Valve Configuration | 0.872 in |
| Mounting Flange | 0.7335 in |
| Cover End Flow @ RPM | 0.7225 in |
| Pump Series | N/A |
| Max. RPM [Max | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Shaft Type | V2020-1F11S6S-11BB30 |
| Major Diameter [Min | 2500 |
| Cover End Pressure [Max | 2500 |
| Weight | 9 |
| Shaft End RPM [Max | 16.5 |
| Minor Diameter [Min | N/A |
| Pressure Port Size, Shaft End | Outlet 90° CCW from Inlet |
| GPM @ 1,800 rpm, Shaft End | Outlet 90° CCW from Inlet |
| Relief Valve Setting | 3/4 in SAE O-Ring |
| Shaft Length | 3/4 in SAE O-Ring |
| Model No. | 1.19 |
| Pressure Port Size, Cover End | 2.22 |
BMP315/OBP315 High Speed Orbit Hydraulic Motor For Drilling Machine