3N2078 Tractor Fuel Pump For Caterpillar Engine Part D348 D349 D379
| Shaft Seal Type: | 30.0 LB |
| Rotation: | Flange Mount |
| Displacement Cover End (cu in/revolution): | Right Hand (CW) |
| GPM @ 1,800 rpm, Cover End: | V2010-1F13S7S-11AD12 |
| Relief Valve Setting: | 1 1/2 |
| Cover End Pressure [Max: | Flange |
| Minor Diameter [Min: | N/A |
| Manufacturer Part No.: | N/A |
| PDF |
|
Product Details
| Shaft Seal Type | 30.0 LB |
| Rotation | Flange Mount |
| Displacement Cover End (cu in/revolution) | Right Hand (CW) |
| GPM @ 1,800 rpm, Cover End | V2010-1F13S7S-11AD12 |
| Relief Valve Setting | 1 1/2 |
| Cover End Pressure [Max | Flange |
| Minor Diameter [Min | N/A |
| Manufacturer Part No. | N/A |
| Weight | 0.875 in |
| Controlled Flow Rate | 13 Tooth Splined |
| GPM @ 1,800 rpm, Shaft End | V2010 |
| Max. RPM [Max | 1 5/16 in |
| Pressure Port Size, Shaft End | Buna-N |
| Shaft End RPM [Max | 2400 |
| Shaft Type | 0.728 in |
| Integral Valve Configuration | SAE B, 2 Bolt |
| Port Orientation - Shaft End | Single Shaft Seal |
| Major Diameter [Min | 16/32 |
| Seal Material | 2800 |
| Shaft End Flow @ RPM | 2400 |
| Minor Diameter | N/A |
| Spline Description | 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Shaft Length | 0.873 in |
| Minor Diameter [Max | 0.872 in |
| Mounting | 0.7335 in |
| Model No. | 0.7225 in |
| Pressure Port Size, Cover End | N/A |
| Pilot Type | 13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm |
| Shaft End Pressure [Max | V2010-1F13S7S-11AD12 |
| Displacement Shaft End (cu in/revolution) | 2000 |
| Port Orientation - Cover End | 2200 |
| Cover End Flow @ RPM | 10.5 |
| Shaft Dia. | 19.5 |
| Major Diameter [Max | N/A |
| Port Size | Outlet 135° CW from Inlet |
| Port Type | Outlet Opposite Inlet |
| Cover End RPM [Max | 1/2 in SAE O-Ring |
| Pump Series | 3/4 in SAE O-Ring |
| Shaft Key | 1.39 |
| Mounting Flange | 2.59 |
BMP315/OBP315 High Speed Orbit Hydraulic Motor For Drilling Machine