Excavator Engine C13 Piston Ring 4157459/3316025/ 2651113 replace CAT
Relief Valve Setting: | 76.0 LB |
Mounting Flange: | Flange Mount |
Shaft End Pressure [Max: | Right Hand (CW) |
Port Orientation - Shaft End: | 3525VQ35A21-11DD20 |
Mounting: | 3 |
Displacement Shaft End (cu in/revolution): | Flange |
Pressure Port Size, Cover End: | N/A |
Minor Diameter: | Standard Pilot |
PDF |
|
Product Details
Relief Valve Setting | 76.0 LB |
Mounting Flange | Flange Mount |
Shaft End Pressure [Max | Right Hand (CW) |
Port Orientation - Shaft End | 3525VQ35A21-11DD20 |
Mounting | 3 |
Displacement Shaft End (cu in/revolution) | Flange |
Pressure Port Size, Cover End | N/A |
Minor Diameter | Standard Pilot |
Integral Valve Configuration | 1.25 in |
Major Diameter [Max | 14 Tooth Splined |
Displacement Cover End (cu in/revolution) | 3525VQ |
Pilot Type | 1.9375 in |
Shaft Dia. | Buna-N |
Shaft Type | 2400 |
Model No. | 1.04 in |
Cover End Pressure [Max | SAE C, 2 Bolt |
Cover End Flow @ RPM | Single Shaft Seal |
Port Type | 12/24 |
Controlled Flow Rate | 2500 |
Spline Description | 2400 |
Max. RPM [Max | N/A |
Port Size | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Shaft Length | 1.248 in |
GPM @ 1,800 rpm, Shaft End | 1.247 in |
Pump Series | N/A |
Weight | N/A |
Rotation | N/A |
Shaft Key | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
GPM @ 1,800 rpm, Cover End | 3525VQ35A21-11DD20 |
Pressure Port Size, Shaft End | 3000 |
Shaft Seal Type | 3000 |
Cover End RPM [Max | 31.5 |
Manufacturer Part No. | 52.5 |
Minor Diameter [Max | w/o Integral Valves |
Port Orientation - Cover End | Outlet 135° CW from Inlet |
Major Diameter [Min | Outlet 90° CW from Inlet |
Minor Diameter [Min | 1 in Flange |
Seal Material | 1 1/4 in Flange |
Shaft End Flow @ RPM | 4.12 |
Shaft End RPM [Max | 6.88 |