CAT Excavator 362-1163 Hydraulic Oil Filter Element
| Port Orientation - Shaft End: | 45.0 LB |
| GPM @ 1,800 rpm, Shaft End: | Flange Mount |
| Displacement Shaft End (cu in/revolution): | Right Hand (CW) |
| Shaft Dia.: | 2520VQ21E11-11DD20 |
| Model No.: | 2 1/2 |
| Minor Diameter: | Flange |
| Pump Series: | N/A |
| Shaft Key: | Standard Pilot |
| PDF |
|
Product Details
| Port Orientation - Shaft End | 45.0 LB |
| GPM @ 1,800 rpm, Shaft End | Flange Mount |
| Displacement Shaft End (cu in/revolution) | Right Hand (CW) |
| Shaft Dia. | 2520VQ21E11-11DD20 |
| Model No. | 2 1/2 |
| Minor Diameter | Flange |
| Pump Series | N/A |
| Shaft Key | Standard Pilot |
| Cover End Pressure [Max | 0.875 in |
| Port Type | 13 Tooth Splined |
| Seal Material | 2520VQ |
| Port Size | 1 3/8 in |
| Max. RPM [Max | Buna-N |
| Rotation | 2500 |
| Displacement Cover End (cu in/revolution) | 0.715 in |
| Major Diameter [Min | SAE B, 2 Bolt |
| Spline Description | Single Shaft Seal |
| Relief Valve Setting | 16/32 |
| Cover End Flow @ RPM | 2700 |
| Shaft End Pressure [Max | 2500 |
| Pressure Port Size, Shaft End | N/A |
| Shaft Seal Type | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Major Diameter [Max | 0.873 in |
| Mounting | 0.872 in |
| Shaft Type | N/A |
| Minor Diameter [Max | N/A |
| Pressure Port Size, Cover End | N/A |
| Cover End RPM [Max | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Weight | 2520VQ21E11-11DD20 |
| Integral Valve Configuration | 3000 |
| Shaft Length | 3000 |
| Pilot Type | 16.5 |
| Mounting Flange | 31.5 |
| Shaft End RPM [Max | w/o Integral Valves |
| Manufacturer Part No. | Outlet 135° CW from Inlet |
| Controlled Flow Rate | Outlet 90° CW from Inlet |
| Shaft End Flow @ RPM | 1 1/16 in SAE O-Ring |
| GPM @ 1,800 rpm, Cover End | 1 in Flange |
| Port Orientation - Cover End | 2.22 |
| Minor Diameter [Min | 4.12 |
101-1052-009/101-1052 BMPH160 Hydraulic Orbit Motor For Auger