Aftermarket 510-1 GD605-3 Bulldozer hydraulic Gear Pump 705-11-33100
| Rotation: | 76.0 LB |
| Major Diameter [Min: | Flange Mount |
| Seal Material: | Right Hand (CW) |
| Minor Diameter [Max: | 3525VQ35A21-1CC20 |
| Integral Valve Configuration: | 3 |
| Major Diameter [Max: | Flange |
| Shaft Seal Type: | 5/16 in |
| Pilot Type: | Standard Pilot |
| PDF |
|
Product Details
| Rotation | 76.0 LB |
| Major Diameter [Min | Flange Mount |
| Seal Material | Right Hand (CW) |
| Minor Diameter [Max | 3525VQ35A21-1CC20 |
| Integral Valve Configuration | 3 |
| Major Diameter [Max | Flange |
| Shaft Seal Type | 5/16 in |
| Pilot Type | Standard Pilot |
| Port Type | 1.25 in |
| Relief Valve Setting | Straight w/ Key |
| Port Size | 3525VQ |
| Spline Description | 2.5 in |
| Manufacturer Part No. | Double |
| Max. RPM [Max | Buna-N |
| Mounting Flange | 2400 |
| Minor Diameter [Min | N/A |
| Cover End Flow @ RPM | SAE C, 2 Bolt |
| Weight | Single Shaft Seal |
| Controlled Flow Rate | N/A |
| Shaft End RPM [Max | 2500 |
| Shaft End Pressure [Max | 2400 |
| GPM @ 1,800 rpm, Cover End | N/A |
| Shaft Dia. | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) | 6.9 |
| Pressure Port Size, Cover End | N/A |
| Port Orientation - Cover End | N/A |
| Model No. | N/A |
| Shaft End Flow @ RPM | N/A |
| Shaft Type | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Pump Series | 3525VQ35A21-1CC20 |
| Displacement Cover End (cu in/revolution) | 3000 |
| Mounting | 3000 |
| Cover End Pressure [Max | 31.5 |
| Port Orientation - Shaft End | 52.5 |
| Minor Diameter | w/o Integral Valves |
| Cover End RPM [Max | Outlet 45° CW from Inlet |
| GPM @ 1,800 rpm, Shaft End | Outlet Inline w/Inlet |
| Shaft Key | 1 in Flange |
| Shaft Length | 1 1/4 in Flange |
| Pressure Port Size, Shaft End | 4.1 |
101-1052-009/101-1052 BMPH160 Hydraulic Orbit Motor For Auger