Dump Truck Lifting Components Hydraulic Gear Pumps KP1505A
| Shaft End RPM [Max: | 75.0 LB |
| Minor Diameter [Max: | Flange Mount |
| Port Type: | Right Hand (CW) |
| Cover End Flow @ RPM: | 3520VQ30A5-11DD20 |
| Relief Valve Setting: | 3 |
| Displacement Cover End (cu in/revolution): | Flange |
| GPM @ 1,800 rpm, Cover End: | N/A |
| Shaft Key: | Standard Pilot |
| PDF |
|
Product Details
| Shaft End RPM [Max | 75.0 LB |
| Minor Diameter [Max | Flange Mount |
| Port Type | Right Hand (CW) |
| Cover End Flow @ RPM | 3520VQ30A5-11DD20 |
| Relief Valve Setting | 3 |
| Displacement Cover End (cu in/revolution) | Flange |
| GPM @ 1,800 rpm, Cover End | N/A |
| Shaft Key | Standard Pilot |
| Controlled Flow Rate | 1.25 in |
| Major Diameter [Min | 14 Tooth Splined |
| Shaft Length | 3520VQ |
| Port Orientation - Cover End | 1 15/16 in |
| Max. RPM [Max | Buna-N |
| GPM @ 1,800 rpm, Shaft End | 2500 |
| Displacement Shaft End (cu in/revolution) | 1.04 in |
| Mounting | SAE C, 2 Bolt |
| Integral Valve Configuration | Single Shaft Seal |
| Port Size | 12/24 |
| Cover End Pressure [Max | 2500 |
| Minor Diameter [Min | 2500 |
| Shaft Dia. | N/A |
| Pressure Port Size, Cover End | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Rotation | 1.248 in |
| Shaft End Pressure [Max | 1.247 in |
| Minor Diameter | N/A |
| Model No. | N/A |
| Cover End RPM [Max | N/A |
| Shaft End Flow @ RPM | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Major Diameter [Max | 3520VQ30A5-11DD20 |
| Mounting Flange | 3000 |
| Shaft Type | 3000 |
| Pilot Type | 7.5 |
| Spline Description | 45 |
| Pressure Port Size, Shaft End | w/o Integral Valves |
| Seal Material | Outlet 135° CW from Inlet |
| Weight | Outlet 90° CW from Inlet |
| Pump Series | 3/4 in Flange |
| Shaft Seal Type | 1 1/4 in Flange |
| Port Orientation - Shaft End | 1.1 |
| Manufacturer Part No. | 5.96 |
101-1052-009/101-1052 BMPH160 Hydraulic Orbit Motor For Auger