Excavator 4HK1 Engine Water Pump 8-98022872-1 for ZAX200-3
| Displacement Shaft End (cu in/revolution): | 45.0 LB |
| Pressure Port Size, Shaft End: | Flange Mount |
| Shaft End Pressure [Max: | Right Hand (CW) |
| Port Type: | 2520V14A11-1BC22R |
| Cover End RPM [Max: | 2 1/2 |
| Model No.: | Flange |
| Max. RPM [Max: | 1/4 in |
| Integral Valve Configuration: | Standard Pilot |
| PDF |
|
Product Details
| Displacement Shaft End (cu in/revolution) | 45.0 LB |
| Pressure Port Size, Shaft End | Flange Mount |
| Shaft End Pressure [Max | Right Hand (CW) |
| Port Type | 2520V14A11-1BC22R |
| Cover End RPM [Max | 2 1/2 |
| Model No. | Flange |
| Max. RPM [Max | 1/4 in |
| Integral Valve Configuration | Standard Pilot |
| Port Size | 0.875 in |
| Shaft Length | Straight w/ Key |
| Mounting | 2520V |
| Major Diameter [Max | 2.32 in |
| Seal Material | Buna-N |
| Displacement Cover End (cu in/revolution) | 1800 |
| Port Orientation - Cover End | N/A |
| Shaft End RPM [Max | SAE B, 2 Bolt |
| Cover End Pressure [Max | Single Shaft Seal |
| Relief Valve Setting | N/A |
| Pump Series | 1800 |
| Shaft Seal Type | 1800 |
| Weight | N/A |
| Pressure Port Size, Cover End | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Major Diameter [Min | N/A |
| Controlled Flow Rate | N/A |
| Mounting Flange | N/A |
| Cover End Flow @ RPM | N/A |
| Rotation | N/A |
| Shaft Type | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End | 2520V14A11-1BC22R |
| Minor Diameter [Max | 3000 |
| GPM @ 1,800 rpm, Cover End | 2500 |
| Port Orientation - Shaft End | 16.5 |
| Shaft Dia. | 21 |
| Manufacturer Part No. | N/A |
| Minor Diameter | Outlet 45° CW from Inlet |
| Shaft End Flow @ RPM | Outlet 90° CCW from Inlet |
| Shaft Key | 3/4 in Code 61 |
| Minor Diameter [Min | 1 in Code 61 |
| Pilot Type | 2.2 |
| Spline Description | 2.8 |
101-1052-009/101-1052 BMPH160 Hydraulic Orbit Motor For Auger