Excavator Hydraulic Gear Pump 4181700 for EX300 Pilot Pump
| Port Orientation - Shaft End: | 45.0 LB |
| Cover End Flow @ RPM: | Flange Mount |
| Minor Diameter [Max: | Right Hand (CW) |
| Controlled Flow Rate: | 2520VQ17A8-11DD20 |
| Major Diameter [Max: | 2 1/2 |
| Relief Valve Setting: | Flange |
| Pressure Port Size, Cover End: | N/A |
| Shaft Dia.: | Standard Pilot |
| PDF |
|
Product Details
| Port Orientation - Shaft End | 45.0 LB |
| Cover End Flow @ RPM | Flange Mount |
| Minor Diameter [Max | Right Hand (CW) |
| Controlled Flow Rate | 2520VQ17A8-11DD20 |
| Major Diameter [Max | 2 1/2 |
| Relief Valve Setting | Flange |
| Pressure Port Size, Cover End | N/A |
| Shaft Dia. | Standard Pilot |
| Displacement Cover End (cu in/revolution) | 0.875 in |
| Cover End RPM [Max | 13 Tooth Splined |
| Pilot Type | 2520VQ |
| Mounting | 1 3/8 in |
| Shaft End Pressure [Max | Buna-N |
| Cover End Pressure [Max | 2500 |
| Max. RPM [Max | 0.715 in |
| Shaft Type | SAE B, 2 Bolt |
| Minor Diameter | Single Shaft Seal |
| Seal Material | 16/32 |
| GPM @ 1,800 rpm, Cover End | 2700 |
| GPM @ 1,800 rpm, Shaft End | 2500 |
| Port Size | N/A |
| Shaft Seal Type | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Spline Description | 0.873 in |
| Manufacturer Part No. | 0.872 in |
| Shaft Key | N/A |
| Minor Diameter [Min | N/A |
| Mounting Flange | N/A |
| Shaft Length | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Major Diameter [Min | 2520VQ17A8-11DD20 |
| Shaft End Flow @ RPM | 3000 |
| Port Type | 3000 |
| Pressure Port Size, Shaft End | 12 |
| Rotation | 25.5 |
| Pump Series | w/o Integral Valves |
| Weight | Outlet 135° CW from Inlet |
| Integral Valve Configuration | Outlet 90° CW from Inlet |
| Displacement Shaft End (cu in/revolution) | 3/4 in Flange |
| Shaft End RPM [Max | 1 in Flange |
| Port Orientation - Cover End | 1.67 |
| Model No. | 3.37 |
BMPH200 Orbit Hydraulic Motor 101-1692-009/101-1692