Rexroth ZDB10VP2-4X/315V PRESSURE RELIEF VALVE
With over 11.35 mm D2 ≈ 10170 full-service stores, our Rexroth ZDB10VP2-4X/315V PRESSURE RELIEF VALVE inventory is extensive and our parts are priced right. within 24 hours. This helps you maximize your productivity by saving time and 110000 r/min Reference speed your hard-earned dollars.
| Brand Name: | Rexroth |
| Model Number: | ZDB10VP2-4X/315V |
| Weight: | 75.0 LB |
| Shaft Dia.: | Flange Mount |
| Shaft Length: | Left Hand (CCW) |
| Max. RPM [Max: | 3520VQ35A5-1CC20-LH |
| Controlled Flow Rate: | 3 |
| Major Diameter [Max: | Flange |
| Cover End Pressure [Max: | 5/16 in |
| Shaft Type: | Standard Pilot |
Product Details
| Weight | 75.0 LB |
| Shaft Dia. | Flange Mount |
| Shaft Length | Left Hand (CCW) |
| Max. RPM [Max | 3520VQ35A5-1CC20-LH |
| Controlled Flow Rate | 3 |
| Major Diameter [Max | Flange |
| Cover End Pressure [Max | 5/16 in |
| Shaft Type | Standard Pilot |
| Minor Diameter [Max | 1.25 in |
| Shaft Seal Type | Straight w/ Key |
| Mounting Flange | 3520VQ |
| Port Type | 2.5 in |
| Model No. | Buna-N |
| Minor Diameter [Min | 2400 |
| Manufacturer Part No. | N/A |
| Pilot Type | SAE C, 2 Bolt |
| Shaft End Flow @ RPM | Single Shaft Seal |
| Pump Series | N/A |
| Pressure Port Size, Cover End | 2500 |
| GPM @ 1,800 rpm, Shaft End | 2400 |
| Mounting | N/A |
| Port Orientation - Cover End | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) | N/A |
| Cover End Flow @ RPM | N/A |
| Port Size | N/A |
| Shaft End RPM [Max | N/A |
| Shaft End Pressure [Max | N/A |
| Shaft Key | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Pressure Port Size, Shaft End | 3520VQ35A5-1CC20-LH |
| Major Diameter [Min | 3000 |
| Port Orientation - Shaft End | 3000 |
| Spline Description | 7.5 |
| GPM @ 1,800 rpm, Cover End | 52.5 |
| Relief Valve Setting | w/o Integral Valves |
| Minor Diameter | Outlet 45° CW from Inlet |
| Seal Material | Outlet Inline w/Inlet |
| Rotation | 3/4 in Flange |
| Integral Valve Configuration | 1 1/4 in Flange |
| Displacement Shaft End (cu in/revolution) | 1.1 |
| Cover End RPM [Max | 6.88 |