DEUTZ DLLA 142P 1321 injector
Request A Quote For 70.2 Dynamic Load Rating (kN): Your Special DEUTZ DLLA 142P 1321 injector Needs Today! Free DEUTZ injector Quotes. Open Type Seals or Shields: ISO 9001 Brass Cage Type: certified.
What is DLLA 142P 1321 bearing interchange？
| Brand Name: | DEUTZ |
| Model Number: | DLLA 142P 1321 |
| Pressure Port Size, Shaft End: | 45.0 LB |
| Major Diameter [Min: | Flange Mount |
| Mounting Flange: | Right Hand (CW) |
| Shaft Type: | 2520VQ17A5-1DC20 |
| Shaft Dia.: | 2 1/2 |
| Max. RPM [Max: | Flange |
| Manufacturer Part No.: | 3/16 in |
| Seal Material: | Standard Pilot |
Product Details
| Pressure Port Size, Shaft End | 45.0 LB |
| Major Diameter [Min | Flange Mount |
| Mounting Flange | Right Hand (CW) |
| Shaft Type | 2520VQ17A5-1DC20 |
| Shaft Dia. | 2 1/2 |
| Max. RPM [Max | Flange |
| Manufacturer Part No. | 3/16 in |
| Seal Material | Standard Pilot |
| Rotation | 0.875 in |
| Model No. | Straight w/ Key |
| Shaft End Pressure [Max | 2520VQ |
| Port Type | 1.9375 in |
| Cover End Flow @ RPM | Buna-N |
| Integral Valve Configuration | 2500 |
| Pilot Type | N/A |
| Shaft Seal Type | SAE B, 2 Bolt |
| Minor Diameter [Max | Single Shaft Seal |
| Cover End RPM [Max | N/A |
| Minor Diameter [Min | 2700 |
| Mounting | 2500 |
| Shaft End RPM [Max | N/A |
| Relief Valve Setting | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Cover End Pressure [Max | N/A |
| Pressure Port Size, Cover End | N/A |
| Port Orientation - Shaft End | N/A |
| Minor Diameter | N/A |
| Major Diameter [Max | N/A |
| Controlled Flow Rate | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Shaft End Flow @ RPM | 2520VQ17A5-1DC20 |
| Pump Series | 3000 |
| Weight | 3000 |
| Spline Description | 7.5 |
| Port Orientation - Cover End | 25.5 |
| GPM @ 1,800 rpm, Shaft End | w/o Integral Valves |
| Displacement Cover End (cu in/revolution) | Outlet 45° CW from Inlet |
| GPM @ 1,800 rpm, Cover End | Outlet 90° CW from Inlet |
| Shaft Length | 3/4 in Flange |
| Port Size | 1 in Flange |
| Shaft Key | 1.1 |
| Displacement Shaft End (cu in/revolution) | 3.37 |
