ALP2A/ALP2-D-6/9/10/13/16/20/22/25/30/34/40/50 High Pressure Hydraulic Gear Pump
Max. RPM [Max: | 30.0 LB |
Manufacturer Part No.: | Flange Mount |
Cover End Flow @ RPM: | Right Hand (CW) |
Minor Diameter [Max: | V2010-1F9S5S-11AA12 |
GPM @ 1,800 rpm, Cover End: | 1 1/2 |
Shaft End Flow @ RPM: | Flange |
Model No.: | N/A |
Shaft End Pressure [Max: | N/A |
PDF |
|
Product Details
Max. RPM [Max | 30.0 LB |
Manufacturer Part No. | Flange Mount |
Cover End Flow @ RPM | Right Hand (CW) |
Minor Diameter [Max | V2010-1F9S5S-11AA12 |
GPM @ 1,800 rpm, Cover End | 1 1/2 |
Shaft End Flow @ RPM | Flange |
Model No. | N/A |
Shaft End Pressure [Max | N/A |
Major Diameter [Max | 0.875 in |
Shaft Seal Type | 13 Tooth Splined |
Cover End Pressure [Max | V2010 |
Major Diameter [Min | 1 5/16 in |
Mounting Flange | Buna-N |
Controlled Flow Rate | 2800 |
Minor Diameter | 0.728 in |
Port Orientation - Cover End | SAE B, 2 Bolt |
Port Orientation - Shaft End | Single Shaft Seal |
Displacement Shaft End (cu in/revolution) | 16/32 |
Shaft Type | 3000 |
Port Size | 2800 |
Shaft Length | N/A |
Pump Series | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Pressure Port Size, Cover End | 0.873 in |
Seal Material | 0.872 in |
Minor Diameter [Min | 0.7335 in |
Spline Description | 0.7225 in |
Shaft End RPM [Max | N/A |
Integral Valve Configuration | 9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm |
Shaft Dia. | V2010-1F9S5S-11AA12 |
Shaft Key | 2500 |
Weight | 2500 |
Rotation | 7.5 |
Mounting | 13.5 |
Pressure Port Size, Shaft End | N/A |
Displacement Cover End (cu in/revolution) | Outlet 135° CCW from Inlet |
Pilot Type | Outlet Opposite Inlet |
Cover End RPM [Max | 1/2 in SAE O-Ring |
GPM @ 1,800 rpm, Shaft End | 3/4 in SAE O-Ring |
Port Type | 1 |
Relief Valve Setting | 1.81 |