Diesel Fuel Transfer Pump 1W1695 2794980 for Fuel System/Governor
| Shaft Key: | 45.0 LB |
| Weight: | Flange Mount |
| Cover End Pressure [Max: | Right Hand (CW) |
| Minor Diameter: | 2520VQ21A5-11DD20 |
| Mounting Flange: | 2 1/2 |
| Cover End Flow @ RPM: | Flange |
| Port Orientation - Shaft End: | N/A |
| Pilot Type: | Standard Pilot |
| PDF |
|
Product Details
| Shaft Key | 45.0 LB |
| Weight | Flange Mount |
| Cover End Pressure [Max | Right Hand (CW) |
| Minor Diameter | 2520VQ21A5-11DD20 |
| Mounting Flange | 2 1/2 |
| Cover End Flow @ RPM | Flange |
| Port Orientation - Shaft End | N/A |
| Pilot Type | Standard Pilot |
| Pressure Port Size, Cover End | 0.875 in |
| Shaft Type | 13 Tooth Splined |
| Major Diameter [Max | 2520VQ |
| Port Orientation - Cover End | 1 3/8 in |
| Shaft Seal Type | Buna-N |
| Pump Series | 2500 |
| Minor Diameter [Min | 0.715 in |
| Cover End RPM [Max | SAE B, 2 Bolt |
| Shaft Length | Single Shaft Seal |
| Integral Valve Configuration | 16/32 |
| Port Type | 2700 |
| GPM @ 1,800 rpm, Shaft End | 2500 |
| Pressure Port Size, Shaft End | N/A |
| GPM @ 1,800 rpm, Cover End | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Rotation | 0.873 in |
| Relief Valve Setting | 0.872 in |
| Shaft End Flow @ RPM | N/A |
| Max. RPM [Max | N/A |
| Shaft End RPM [Max | N/A |
| Shaft End Pressure [Max | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Major Diameter [Min | 2520VQ21A5-11DD20 |
| Controlled Flow Rate | 3000 |
| Displacement Shaft End (cu in/revolution) | 3000 |
| Port Size | 7.5 |
| Minor Diameter [Max | 31.5 |
| Manufacturer Part No. | w/o Integral Valves |
| Mounting | Outlet 135° CW from Inlet |
| Spline Description | Outlet 90° CW from Inlet |
| Seal Material | 3/4 in Flange |
| Model No. | 1 in Flange |
| Shaft Dia. | 1.1 |
| Displacement Cover End (cu in/revolution) | 4.12 |
Low Speed BMP100 Hydraulic Orbit Motor For Replace Sauer