2W1223 New Replacement Water Pump for Engine 3204 Motors
| Pump Series: | 76.0 LB |
| Minor Diameter [Max: | Flange Mount |
| Minor Diameter: | Right Hand (CW) |
| Seal Material: | 3525VQ35A21-11DD20 |
| Controlled Flow Rate: | 3 |
| Relief Valve Setting: | Flange |
| Weight: | N/A |
| GPM @ 1,800 rpm, Cover End: | Standard Pilot |
| PDF |
|
Product Details
| Pump Series | 76.0 LB |
| Minor Diameter [Max | Flange Mount |
| Minor Diameter | Right Hand (CW) |
| Seal Material | 3525VQ35A21-11DD20 |
| Controlled Flow Rate | 3 |
| Relief Valve Setting | Flange |
| Weight | N/A |
| GPM @ 1,800 rpm, Cover End | Standard Pilot |
| Cover End Flow @ RPM | 1.25 in |
| Shaft End RPM [Max | 14 Tooth Splined |
| Pilot Type | 3525VQ |
| Minor Diameter [Min | 1.9375 in |
| Pressure Port Size, Cover End | Buna-N |
| Major Diameter [Max | 2400 |
| Cover End Pressure [Max | 1.04 in |
| Cover End RPM [Max | SAE C, 2 Bolt |
| Shaft Seal Type | Single Shaft Seal |
| Displacement Shaft End (cu in/revolution) | 12/24 |
| Port Type | 2500 |
| Shaft End Flow @ RPM | 2400 |
| Model No. | N/A |
| Manufacturer Part No. | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Rotation | 1.248 in |
| Port Size | 1.247 in |
| Port Orientation - Cover End | N/A |
| Mounting | N/A |
| GPM @ 1,800 rpm, Shaft End | N/A |
| Mounting Flange | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Spline Description | 3525VQ35A21-11DD20 |
| Shaft Type | 3000 |
| Port Orientation - Shaft End | 3000 |
| Shaft Length | 31.5 |
| Displacement Cover End (cu in/revolution) | 52.5 |
| Pressure Port Size, Shaft End | w/o Integral Valves |
| Shaft Key | Outlet 135° CW from Inlet |
| Integral Valve Configuration | Outlet 90° CW from Inlet |
| Max. RPM [Max | 1 in Flange |
| Shaft End Pressure [Max | 1 1/4 in Flange |
| Shaft Dia. | 4.12 |
| Major Diameter [Min | 6.88 |
Low Speed BMP100 Hydraulic Orbit Motor For Replace Sauer