705-51-20800 Hydraulic Gear Pump for Dozer D65EX-12 D65EX-15 D65P-12
| Minor Diameter: | 75.0 LB |
| Shaft End Flow @ RPM: | Flange Mount |
| Major Diameter [Min: | Right Hand (CW) |
| Mounting: | 3520V30A11-11DD22R |
| Pressure Port Size, Shaft End: | 3 |
| Weight: | Flange |
| Shaft End RPM [Max: | N/A |
| Port Type: | Standard Pilot |
| PDF |
|
Product Details
| Minor Diameter | 75.0 LB |
| Shaft End Flow @ RPM | Flange Mount |
| Major Diameter [Min | Right Hand (CW) |
| Mounting | 3520V30A11-11DD22R |
| Pressure Port Size, Shaft End | 3 |
| Weight | Flange |
| Shaft End RPM [Max | N/A |
| Port Type | Standard Pilot |
| Integral Valve Configuration | 1.375 in |
| Major Diameter [Max | 14 Tooth Splined |
| Rotation | 3520V |
| Port Orientation - Shaft End | 2.3125 in |
| Port Size | Buna-N |
| Manufacturer Part No. | 1800 |
| Seal Material | 1.055 in |
| GPM @ 1,800 rpm, Cover End | SAE C, 2 Bolt |
| Spline Description | Single Shaft Seal |
| Cover End Pressure [Max | 12/24 |
| Model No. | 1800 |
| Pump Series | 1800 |
| Shaft Seal Type | N/A |
| GPM @ 1,800 rpm, Shaft End | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Cover End Flow @ RPM | 1.25 in |
| Shaft Length | 1.247 in |
| Minor Diameter [Min | 1.06 in |
| Pilot Type | 1.05 in |
| Max. RPM [Max | N/A |
| Shaft Key | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Mounting Flange | 3520V30A11-11DD22R |
| Displacement Cover End (cu in/revolution) | 3000 |
| Shaft Type | 2500 |
| Controlled Flow Rate | 16.5 |
| Pressure Port Size, Cover End | 45 |
| Shaft Dia. | N/A |
| Port Orientation - Cover End | Outlet 135° CW from Inlet |
| Cover End RPM [Max | Outlet 90° CW from Inlet |
| Minor Diameter [Max | 3/4 in Code 61 |
| Shaft End Pressure [Max | 1 1/4 in Code 61 |
| Relief Valve Setting | 2.2 |
| Displacement Shaft End (cu in/revolution) | 5.9 |
Low Speed BMP100 Hydraulic Orbit Motor For Replace Sauer