replacement hydraulic vane pump cartridge kit for Vickers V10 V20
| Shaft Key: | 45.0 LB |
| Shaft End RPM [Max: | Flange Mount |
| Pressure Port Size, Shaft End: | Right Hand (CW) |
| Shaft Type: | 2520VQ12A5-11DD20 |
| Relief Valve Setting: | 2 1/2 |
| Cover End Flow @ RPM: | Flange |
| Port Orientation - Shaft End: | N/A |
| Mounting: | Standard Pilot |
| PDF |
|
Product Details
| Shaft Key | 45.0 LB |
| Shaft End RPM [Max | Flange Mount |
| Pressure Port Size, Shaft End | Right Hand (CW) |
| Shaft Type | 2520VQ12A5-11DD20 |
| Relief Valve Setting | 2 1/2 |
| Cover End Flow @ RPM | Flange |
| Port Orientation - Shaft End | N/A |
| Mounting | Standard Pilot |
| GPM @ 1,800 rpm, Shaft End | 0.875 in |
| Pump Series | 13 Tooth Splined |
| Minor Diameter [Max | 2520VQ |
| Major Diameter [Min | 1 3/8 in |
| Spline Description | Buna-N |
| Shaft End Pressure [Max | 2700 |
| Pressure Port Size, Cover End | 0.715 in |
| Pilot Type | SAE B, 2 Bolt |
| Port Type | Single Shaft Seal |
| Cover End RPM [Max | 16/32 |
| Major Diameter [Max | 2700 |
| Minor Diameter [Min | 2700 |
| Shaft Seal Type | N/A |
| Integral Valve Configuration | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Model No. | 0.873 in |
| Weight | 0.872 in |
| Displacement Shaft End (cu in/revolution) | N/A |
| Shaft Length | N/A |
| GPM @ 1,800 rpm, Cover End | N/A |
| Port Size | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Controlled Flow Rate | 2520VQ12A5-11DD20 |
| Cover End Pressure [Max | 3000 |
| Shaft Dia. | 3000 |
| Seal Material | 7.5 |
| Shaft End Flow @ RPM | 18 |
| Minor Diameter | w/o Integral Valves |
| Port Orientation - Cover End | Outlet 135° CW from Inlet |
| Max. RPM [Max | Outlet 90° CW from Inlet |
| Displacement Cover End (cu in/revolution) | 3/4 in Flange |
| Rotation | 1 in Flange |
| Mounting Flange | 1.1 |
| Manufacturer Part No. | 2.45 |
Low Speed BMP100 Hydraulic Orbit Motor For Replace Sauer