Replace Parker Commercial Air or Manual Control Gear Pump G101 G102 For Dump Truck
| Weight: | 45.0 LB |
| Shaft End RPM [Max: | Flange Mount |
| Seal Material: | Left Hand (CCW) |
| Pressure Port Size, Cover End: | 2520VQ12A5-11BC20LH |
| Shaft End Flow @ RPM: | 2 1/2 |
| Shaft Seal Type: | Flange |
| Minor Diameter: | N/A |
| Port Orientation - Shaft End: | Standard Pilot |
| PDF |
|
Product Details
| Weight | 45.0 LB |
| Shaft End RPM [Max | Flange Mount |
| Seal Material | Left Hand (CCW) |
| Pressure Port Size, Cover End | 2520VQ12A5-11BC20LH |
| Shaft End Flow @ RPM | 2 1/2 |
| Shaft Seal Type | Flange |
| Minor Diameter | N/A |
| Port Orientation - Shaft End | Standard Pilot |
| Shaft Key | 0.875 in |
| GPM @ 1,800 rpm, Shaft End | 13 Tooth Splined |
| Spline Description | 2520VQ |
| Displacement Shaft End (cu in/revolution) | 1 3/8 in |
| Rotation | Buna-N |
| Shaft Length | 2700 |
| Major Diameter [Min | 0.715 in |
| Major Diameter [Max | SAE B, 2 Bolt |
| Minor Diameter [Max | Single Shaft Seal |
| Pump Series | 16/32 |
| Shaft End Pressure [Max | 2700 |
| Max. RPM [Max | 2700 |
| Minor Diameter [Min | N/A |
| Model No. | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Port Type | 0.873 in |
| Cover End RPM [Max | 0.872 in |
| Pilot Type | N/A |
| Cover End Flow @ RPM | N/A |
| Displacement Cover End (cu in/revolution) | N/A |
| Port Orientation - Cover End | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Shaft Dia. | 2520VQ12A5-11BC20LH |
| Pressure Port Size, Shaft End | 3000 |
| Integral Valve Configuration | 3000 |
| Relief Valve Setting | 7.5 |
| Mounting | 18 |
| Controlled Flow Rate | w/o Integral Valves |
| Cover End Pressure [Max | Outlet 45° CW from Inlet |
| Port Size | Outlet 90° CCW from Inlet |
| GPM @ 1,800 rpm, Cover End | 3/4 in Flange |
| Manufacturer Part No. | 1 in Flange |
| Shaft Type | 1.1 |
| Mounting Flange | 2.45 |
Low Speed BMP100 Hydraulic Orbit Motor For Replace Sauer